4XEM IPCAMWFD manual Save Directly save the adjust image Parameters Group CCD

Page 73

lowbandwidth	0	Disable low bandwidth environment
(r/w)		support

	1	Improve in low bandwidth environment

enableaec	0	Disable
(r/w)
(r/w)	1	Enable

Group: Image

NAME	VALUE		DESCRIPTION

brightness	<-5 ~ 5>		Adjust brightness of image according to
(r/w)			mode settings. <0>

saturation	<-5 ~ 5>		Adjust saturation of image according to
(r/w)			mode settings. <0>

contrast	<-5 ~ 5>		Adjust contrast of image according to
(r/w)			mode settings. <0>

hue	<-5 ~ 5>		Adjust hue of image according to mode
(r/w)			settings. <0>

mode	Preview		Apply the parameter of image but not
(w)			save

	Restore		Restore the last saved image parameters

	Save		Directly save the adjust image
			parameters

Group: CCD

NAME		VALUE		DESCRIPTION

autoelectronicshutter		0		Turn off AES
(r/w)
(r/w)		1		Turn on AES

enableblc		0		Turn off backlight compensation
(r/w)
(r/w)		1		Turn on backlight compensation

		1		Set auto gain control to MAX level

mode		Preview		Apply the parameter of image but
(w)				not save

		Restore		Restore the last saved image
				parameters

- 69 -

Image 73

Contents Page Page Before You Use This Product Package Contents Table of Contents Appendix Smtp FTPPage Ethernet Connection Hardware InstallationMount the Camera Page Page Page Software Installation Page Page Page Installing Plug-in Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Check Network SettingsAuthentication How to UseMain Screen with Camera View Primary User’s CapabilitiesCamera view ConfigurationBoth Client SettingsPage Fine-tuning for Best Performance Administrator’s CapabilitiesFor Best Real-time Video Images Somewhere Between Real-time and Clear ImagesOnly Quality Images Will Do Select for Motion Jpeg Opening Accounts for New Users Protect Network Camera by PasswordsProduct Demo for E-business Large-scale Service Demo on Multiple Sites Mid-scale ServiceIf the web space has FTP service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is DetectedPage Definitions in Configuration System Parameters User Group Administration Page Edit User General Network SettingsStreaming Ddns & UPnP Page Smtp Mail & FTPPage Page Video Codec Parameters Page Contrast Hue Saturation Image SettingsCamera Settings Audio Page Motion Detection Weekly Schedule Application SetupEvent Operation Sequential Operation FTP Naming rule of snapshot filePage Viewing System Log Factory DefaultViewing System Parameters Appendix TroubleshootingFrequently Asked Questions Page Page Overview URL commands of Network CameraStyle convention Get server parameter values General CGI URL syntax and parametersMethod GET/POST Parameter pair Set server parameter valuesParameter pair Skip to invoke default server WirelessNetwork Camera With Pan/Tilt/ZoomAvailable parameters on the server Yyyy/mm/ddNTP 192.168.0.99 Group Security255.255.255.0 Dns1 IP address Primary DNS server 5002 5003384000 120For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Query status of the digital input Drive the digital outputQuery status of the digital output Capture single snapshot Edit Account managementPrivilege=dido&privilege=listen System logsSystem Information Configuration filePage Preset Locations Networking Technical Specifications