4XEM IPCAMWFD manual Build a Security Application, Send Snapshots When Motion is Detected

Page 32

Build a Security Application

The Administrator can combine options on the application page to perform many useful security applications. There are two trigger sources coming from attached devices, such as for motion detection. There are also two kinds of actions responding to such events, including uploading snapshots over the Internet and driving other attached devices. To upload the snapshots, the

User can choose either email or FTP according to user’s needs. Both e-mail and FTP use the network settings on the Mail & FTP page. Refer to the definition section for detail configuration.

1.Click on “Configuration” on the homepage,

2.Click on “Application” in the left column,

3.Check the weekdays as you need and give the period of "Snapshots begin" time and "Snapshots end" time to monitor the triggering conditions every day,

4.Check the “Event operation”. The triggering condition can be set to detected motion or status of the attached device,

5.Set the delay before detecting next event to avoid continuous false alarms following the original event,

Send Snapshots When Motion is Detected

If no external sensor is available, the Administrator can use the built-in motion

- 28 -

Image 32

Contents Page Page Before You Use This Product Package Contents Table of Contents Smtp FTP AppendixPage Hardware Installation Ethernet ConnectionMount the Camera Page Page Page Software Installation Page Page Page Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewClient Settings BothPage Administrator’s Capabilities Fine-tuning for Best PerformanceOnly Quality Images Will Do Somewhere Between Real-time and Clear ImagesFor Best Real-time Video Images Select for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New UsersDemo on Multiple Sites Mid-scale Service Product Demo for E-business Large-scale ServiceIf the web space has FTP service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Send Snapshots When Motion is Detected Build a Security ApplicationPage Definitions in Configuration System Parameters User Group Administration Page Edit User Network Settings GeneralStreaming Ddns & UPnP Page Mail & FTP SmtpPage Page Video Codec Parameters Page Image Settings Contrast Hue SaturationCamera Settings Audio Page Motion Detection Event Operation Application SetupWeekly Schedule Sequential Operation Naming rule of snapshot file FTPPage Viewing System Parameters Factory DefaultViewing System Log Troubleshooting AppendixFrequently Asked Questions Page Page Style convention URL commands of Network CameraOverview Method GET/POST General CGI URL syntax and parametersGet server parameter values Set server parameter values Parameter pairParameter pair WirelessNetwork Camera With Pan/Tilt/Zoom Skip to invoke default serverAvailable parameters on the server Yyyy/mm/ddNTP 255.255.255.0 Group Security192.168.0.99 Dns1 IP address Primary DNS server 5003 5002For Ntsc only 120384000 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Drive the digital output Query status of the digital inputQuery status of the digital output Capture single snapshot Account management EditSystem logs Privilege=dido&privilege=listenConfiguration file System InformationPage Preset Locations Technical Specifications Networking