4XEM IPCAMWFD manual Set server parameter values, Parameter pair

Page 64

you do not specify the any parameters, all the parameters on the server will be returned. If you specify only <group>, the parameters of related group will be returned.

When query parameter values, the current parameter value are returned. Successful control requests returns paramter pairs as follows.

Return:

HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: <length>\r\n \r\n

<parameter pair>

where <parameter pair> is <parameter>=<value>\r\n [<parameter pair>]

<length> is the actual length of content.

Example: request IP address and it’s response

Request: http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress

Response:

HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: 33\r\n \r\n network.ipaddress=192.168.0.123\r\n

Set server parameter values

Note: This request require administrator access

Method: GET/POST

Syntax:

- 60 -

Image 64

Contents Page Page Before You Use This Product Package Contents Table of Contents Smtp FTP AppendixPage Hardware Installation Ethernet ConnectionMount the Camera Page Page Page Software Installation Page Page Page Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewClient Settings BothPage Administrator’s Capabilities Fine-tuning for Best PerformanceFor Best Real-time Video Images Somewhere Between Real-time and Clear ImagesOnly Quality Images Will Do Select for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New UsersDemo on Multiple Sites Mid-scale Service Product Demo for E-business Large-scale ServiceIf the web space has FTP service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Send Snapshots When Motion is Detected Build a Security ApplicationPage Definitions in Configuration System Parameters User Group Administration Page Edit User Network Settings GeneralStreaming Ddns & UPnP Page Mail & FTP SmtpPage Page Video Codec Parameters Page Image Settings Contrast Hue SaturationCamera Settings Audio Page Motion Detection Weekly Schedule Application SetupEvent Operation Sequential Operation Naming rule of snapshot file FTPPage Viewing System Log Factory DefaultViewing System Parameters Troubleshooting AppendixFrequently Asked Questions Page Page Overview URL commands of Network CameraStyle convention Get server parameter values General CGI URL syntax and parametersMethod GET/POST Set server parameter values Parameter pairParameter pair WirelessNetwork Camera With Pan/Tilt/Zoom Skip to invoke default serverAvailable parameters on the server Yyyy/mm/ddNTP 192.168.0.99 Group Security255.255.255.0 Dns1 IP address Primary DNS server 5003 5002384000 120For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Drive the digital output Query status of the digital inputQuery status of the digital output Capture single snapshot Account management EditSystem logs Privilege=dido&privilege=listenConfiguration file System InformationPage Preset Locations Technical Specifications Networking