4XEM IPCAMWFD manual Configuration, Camera view

Page 21

The Configuration:

“Digital Output”

Clicking on the “On” or “Off” button turns the digital output to either on or off status.

“Snapshot”

Clicking on the “Snapshot” can get a JPEG format image of the current camera view in another window.

“Client Settings”

Clicking on this button links you to the client setting pages, please check the following session for more details.

“Configuration” Only the Administrator can access camera configurations.

The camera view

The information bar at the top of the camera view shows the assigned caption and the current date/time. The information bar at the bottom of the camera view shows the current streaming mode and audio transmission mode. You can push/toggle the talk button to talk to the remote server. The volume of speaker and microphone can also be adjusted.

Digital zoom

Talk button

Speaker volume

Microphone volume

The camera view provides not only the live video, but also a way to aim the Network Camera to different target. Using mouse to click on the target inside the video will command the Network Camera to aim at the target and with the mouse wheel up or down, the camera view will zoom out or in.

- 17 -

Image 21

Contents Page Page Before You Use This Product Package Contents Table of Contents Appendix Smtp FTPPage Ethernet Connection Hardware InstallationMount the Camera Page Page Page Software Installation Page Page Page Installing Plug-in Initial Access to the Network Camera Add Password to Prevent Unauthorized Access Check Network SettingsAuthentication How to UseMain Screen with Camera View Primary User’s CapabilitiesCamera view ConfigurationBoth Client SettingsPage Fine-tuning for Best Performance Administrator’s CapabilitiesSomewhere Between Real-time and Clear Images For Best Real-time Video ImagesOnly Quality Images Will Do Select for Motion Jpeg Opening Accounts for New Users Protect Network Camera by PasswordsProduct Demo for E-business Large-scale Service Demo on Multiple Sites Mid-scale ServiceIf the web space has FTP service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is DetectedPage Definitions in Configuration System Parameters User Group Administration Page Edit User General Network SettingsStreaming Ddns & UPnP Page Smtp Mail & FTPPage Page Video Codec Parameters Page Contrast Hue Saturation Image SettingsCamera Settings Audio Page Motion Detection Application Setup Weekly ScheduleEvent Operation Sequential Operation FTP Naming rule of snapshot filePage Factory Default Viewing System LogViewing System Parameters Appendix TroubleshootingFrequently Asked Questions Page Page URL commands of Network Camera OverviewStyle convention General CGI URL syntax and parameters Get server parameter valuesMethod GET/POST Parameter pair Set server parameter valuesParameter pair Skip to invoke default server WirelessNetwork Camera With Pan/Tilt/ZoomAvailable parameters on the server Yyyy/mm/ddNTP Group Security 192.168.0.99255.255.255.0 Dns1 IP address Primary DNS server 5002 5003120 384000For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Query status of the digital input Drive the digital outputQuery status of the digital output Capture single snapshot Edit Account managementPrivilege=dido&privilege=listen System logsSystem Information Configuration filePage Preset Locations Networking Technical Specifications