4XEM IPCAMWFD manual If the web space has no FTP service

Page 30

6.Select the day or days of the week in “Weekly schedule” you want to upload the pictures,

7.Select “Sequential operation” and set the interval,

8.Unselect “FTP put snapshots with date and time suffix” as the upload method and click on “Save”,

9.The image file uploaded to the web space is named “video.jpg”. Check if the file is successfully uploaded to the correct folder,

10.Prepare a homepage with the embedded image reference to the image file uploaded via FTP in advance.

If the web space has no FTP service

An auto-refresh homepage can be used to periodically poll the newest image from the Network Camera. It is most efficient if using a free web space provider as the FTP service may be limiting.

1.Prepare an auto-refresh homepage as the following example. The URL of image is http://“IP address of the Network Camera”/cgi-bin/video.jpg. Modify the IP address according to your Network Camera. Define the refresh interval according to your network bandwidth for best result. If the refresh rate is too fast and there is a large number of visitors, this may overload the Network Camera and slows the response.

- 26 -

Image 30

Contents Page Page Before You Use This Product Package Contents Table of Contents Smtp FTP AppendixPage Hardware Installation Ethernet ConnectionMount the Camera Page Page Page Software Installation Page Page Page Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewClient Settings BothPage Administrator’s Capabilities Fine-tuning for Best PerformanceSomewhere Between Real-time and Clear Images For Best Real-time Video ImagesOnly Quality Images Will Do Select for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New UsersIf the web space has FTP service Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Send Snapshots When Motion is Detected Build a Security ApplicationPage Definitions in Configuration System Parameters User Group Administration Page Edit User Network Settings GeneralStreaming Ddns & UPnP Page Mail & FTP SmtpPage Page Video Codec Parameters Page Image Settings Contrast Hue SaturationCamera Settings Audio Page Motion Detection Application Setup Weekly ScheduleEvent Operation Sequential Operation Naming rule of snapshot file FTPPage Factory Default Viewing System LogViewing System Parameters Troubleshooting AppendixFrequently Asked Questions Page Page URL commands of Network Camera OverviewStyle convention General CGI URL syntax and parameters Get server parameter valuesMethod GET/POST Set server parameter values Parameter pairParameter pair Available parameters on the server WirelessNetwork Camera With Pan/Tilt/ZoomSkip to invoke default server Yyyy/mm/ddNTP Group Security 192.168.0.99255.255.255.0 Dns1 IP address Primary DNS server 5003 5002120 384000For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Drive the digital output Query status of the digital inputQuery status of the digital output Capture single snapshot Account management EditSystem logs Privilege=dido&privilege=listenConfiguration file System InformationPage Preset Locations Technical Specifications Networking