iGuard – Webpage 80 to 80
TCP
Type in the camera’s IP address, for example: 192.168.0.5
Checked in
iGuard – Camera 9001 to 9001
UDP
Type in the camera’s IP address, for example: 192.168.0.5
Checked in
Appendix A: Router Configuration
Linksys (http://www.linksys.com)
BEFSR41 – EtherFast Cable/DSL Router
BEFSX41 – Instant Broadband EtherFast Cable/DSL Firewall Router with
BEFW11S4 – Wireless Access Point Router with
1.Log into your router using your router IP.
2.On the router’s main page, click on Advanced at the top of the page.
3.On the next page, click on Forwarding.
4.Enter the following information on the page:
Line #1:
Customized Applications:
Ext. Port:
Protocol:
IP Address:
Enable:
Line #2:
Customized Applications:
Ext. Port:
Protocol:
IP Address:
Enable:
5.Click on Apply to save the settings. iGuard should now be configured to work with your router and be accessible from the internet.
69