Micon IP-220E manual Iv. Ethernet, Dynamic DNS, Vi. PPPoE

Page 44

Chapter 5: iGuard Web Manager

By default the port number is 9001.

iv.Ethernet

Fig.27 iGuard Ethernet Settings

“Connection Type”

This item sets the communication speed between iGuard and the Network. iGuard will reboot after “Connection Type” is changed.

v.Dynamic DNS

If you use a consumer grade broadband service, the chances are you will have a dynamic IP address. You will need to subscribe to a DDNS service to keep track of this ever-changing IP address if you would like to use the remote monitoring function of iGuard.

Fig.28 iGuard Dynamic DNS Settings

“Service Provider”

As value added service, iGuad.com hosts a DDNS server that tracks iGuard’s IP address if it was changed for any reason. Before you use this function, you will have to register on :www.iguard.com.

Your can also track your IP address by subscribe to other DDNS services via the DDNS client built-in your router..

“Login Name (site name)”

Enter the “login name” you used when you registered on www.iguard.com

“Login Password”

Enter the Password you selected when you registered on www.iguard.com

“Use Public IP to register” Choose “Yes” or “No”.

vi.PPPoE

If you use a dedicated DSL internet service, use this option to directly dial-up your DSL modem and connect to the Internet.

Fig.29 iGuard PPPoE setting

43

Image 44

Contents IGuard Contents Page Features IntroductionPackage Contents IGuard IP-220E Hardware Light color Condition descriptionHardware Installation Installation Procedure StepInstalling iGuardware IGuardwareUsing iGuardware IGuard UtilitySetup Wizard IGuard Setup WizardIGuard Network Setup IGuard a/DSL Setup IGuard PPPoE Setup Launch iGuardManagerChapter.5 Click either one to Launch iGuard IP Configuration IGuard Web ManagerIP Configuration Set an IP Address for iGuard Device Password Reset Device PasswordUpgrade Firmware Ii. Management ProtocolIGuardware IGuardView IGuardView Screen ShotDevice Setting IGuardware Camera Setting Motion Detection Setting REDAvifilethree digit numerical sequence Email Address Email Notification SettingServer Authentication Snmp Setting Using Snmp to update network portsCamera Monitor IGuardware IGuardware View SystemHelp IGuard Web Manager IntroductionIGuard Web Manager Web-Camera Selection Ii. Network Status Information System StatusSystem Information Current Connections IGuard System StatusEvent Log IGuard Current ConnectionsBasic Settings Camera Settings Setting up Camera a Similar with Camera BIndividual Camera Configuration Network IP AddressIi. DNS Server IP Iii. Port NumberVi. PPPoE Iv. EthernetDynamic DNS Account Settings User Account User NameCamera Advanced Settings Event Notification IGuard Permit Hours ConfigurationEvent Notification Send Email IGuard Event NotificationIGuard Event Selection List IGuard Event Start Up Camera a or Camera B Enable Motion DetectionIGuard Motion Detection IGuard Motion Detect Email Notification Image Recording Camera a or Camera B Begin End hhmmMail / FTP IGuard Email of Image RecordedFTP Settings FTP Server Ii. Email Settings E-mail ServerIii. Sending Test Mail IGuard test mail functionSystem Time System SettingsIv. Email Address Book Ii. System Restart Iii. LED SettingsIv. Snmp Settings Snmp setting AboutIi. Save / Restore Settings Save current Configuration AboutDemilitarized Zone DMZ Appendix a Router ConfigurationDdns Port Forwarding BEFSR41 Appendix a Router Configuration Type in the camera’s IP address UDPDescription IGuard Camera Internet Port 9001 to Type TCP Appendix a Router Configuration Dell TrueMobile 2300 Wireless Broadband Router Appendix a Router Configuration Appendix a Router Configuration Appendix a Router Configuration Action Allow always Appendix a Router Configuration TCP Type in the camera’s IP address Appendix a Router Configuration TCP Appendix a Router Configuration Appendix B IP Address, Subnet and Gateway Subnetting and Subnet Masks Subnet Mask Routing and FilteringAppendix C Glossary Term DefinitionAppendix D Q&A Q2. Can I use other USB Camera to connect to iGuard?Q5. What is the effective length of the USB cable? If iGuard is connected to a Router or IP Share then Q13. There is no Port Forwarding Section in my Router Appendix D Glossary