Rockford Fosgate PSD-1 manual Installation, Remote Turn-On/Dimmer Wiring

Page 10

INSTALLATION

Remote Turn-On/Dimmer Wiring

Do Not

Use

Remote Jumper on

PC Board

Orange Wire

Remote

Connect to +12V

Disable

dimmer or “park

light” lead (optional)

I

N

S T A L L A T I O N

•Remote Turn-On (Blue Wire) not used when Remote Jumper has been DISABLED (installed)

•Dimmer (Orange Wire) will dim LEDs when connected to dimmer or “park light” lead (+12V when headlights are turned on)

Remote Jumper on

PC Board

Remote

Enable

Orange Wire

Connect to +12V dimmer or “park light” lead (optional)

Optional

Switch

Blue Wire

Connect to remote turn-on

lead from source unit

•Remove Cover to access Remote Jumper by removing 2 screws on each side of the PSD

•Remote Turn-On (Blue Wire) connects to source unit's accessory turn-on lead when Remote Jumper has been ENABLED (removed)

•An Optional Switch can be used to turn off the PSD independently from the audio system

•Dimmer (Orange Wire) will dim LEDs when connected to dimmer or “park light” lead (+12V when headlights are turned on)

NOTE: The Power 250m2, Power 250m and Power 500m must use the ENABLED Remote turn-On for proper operation.

– 6 –

Image 10

Contents PSD-1 Page Practice Safe Sound TA B L E O F CO N T E N T S T T I N G S T a R T E DT R O D U C T I O N AC C E S S O R Y PA C KDesign Features S TA L L AT I O N CO N S I D E R AT I O N S Mounting Locations WI R I N G T H E SY S T E M Installation Remote Turn-On/Dimmer WiringStereo/Mono Jumper Configuration 2-Channel Amp Stereo/Mono Jumpers are installed on jumper pinsStereo/Mono Jumpers are removed from jumper pins Stereo/Mono Jumper Configuration Mono Amp/sAdapter used on Power 500m amplifier only Standard Mount ISO MountSY S T E M DI a G R a M S Single Amp SystemBi-Amp System Tri-Amp System #1 Tri-Amp System #2 Front Stage MonitorSymptom Diagnosis Remedy Rockford Fosgate AccessoriesTR O U B L E S H O O T I N G Both Power and/or Specification S LED Indicator Threshold of IlluminationWA R R a N T Y in F O R M AT I O N Page Conectando EL Sistema Instalación Conexionado del encendido remoto y del DimmerConfiguración de los Jumpers Amplificador de 2 canales Configuración de los Jumpers Amplificador/es Mono Adaptador utilizado sólo en los amplificadores Power 500mBranchement DU Système Commande dallumage / Dimmer Ne pas UtiliserConfiguration du Pontage Mono/Stéréo Amplis deux Les pontages Stéréo/Mono sont placésAdaptateur utilisé pour le Power 500m seulement Configuration du Pontage Mono/Stéréo Amplis monoLes pontages Stéréo/Mono sont enlevés Verkabelung DES Systems Sie, die für Sie günstigere MethodeEinbau Remote Einschalt-Kabel/Dimmer-KabelJumper Einstellungen bei 2 Kanal Endstufen Zum Anschluβ der Power 500m benötigen Sie einen Adapter Jumper Einstellung Betreib von Mono EndstufenCablare IL Sistema ItalianoInstallazione Cablaggio del consenso ed illuminazioneConfigurazione dei ponticelli amplificatori 2 canali Ponticelli Stereo/Mono sono installati sui pinConfigurazione dei ponticelli amplificatori mono Ponticelli Stereo/Mono sono rimossi dai pinRockford Fosgate