Panasonic CQ-C8803U operating instructions Radio Mode Display, Radio Menu Display

Radio

Radio Mode Display

Band

Preset Number

Lights while receiving an FM stereo signal. Lights when MONO is activated. (a page 22)

Frequency

Lights when LOCAL is activated. (a page 22)

In the AM mode, only AUDIO FILTER and LOCAL can be selected.

1 Press [MENU] to display the menu display.

For using the remote control, hold down

[SEL](MENU) for 2

sec. or more.

MONO (Monaural)

Noise reduction when the signal strength decreases

: Receiving in stereo (default)

: Receiving in mono and reducing the noise level

LOCAL

Setting when searching for a station

Radio Menu Display

2 Press [}] or [{] to select a mode to be adjusted.

3 Press [BAND]

(SET) to adjust.

4 Press [MENU] to confirm the adjust- ment.

For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.

: Searching even for a relatively low-intensity radio wave station (default)

: Searching only for a high-intensity radio wave station

AUDIO FILTER

IF filter setting for noise suppression

: Wide range

: Middle range (default) : Narrow range

PRESET

You can select 6 or 18 stations for FM presetting with the use of APM.

:

Presets 6 stations with good reception to the selected band from FM1 to FM3. This function is useful for preset- ting stations in different areas in different bands. (default)

:

Presets 6 stations to FM1 to FM3 respectively, that is, 18 stations in total at the same time. This function is useful for presetting more than 6 stations.

22CQ-C8803U