Panasonic CQ-C8803U operating instructions Auto disactivated, Audio Setting

(a page 18)

AUTO disactivated)

1 Set the CS AUTO mode to off.

2 Press [VOLUME]

(PUSH SEL: Select) to display the AUDIO menu display.

3 Press [VOL-

UME] (PUSH

SEL: Select) to select a mode to be adjusted.

4 Turn [VOLUME] clockwise or counter- clockwise to adjust.

Note: If no operation takes place for more than 10 seconds in the audio menu (2 sec. in Main volume adjustment), the display returns to the regular mode.

Balance adjustment

(Setting range: L (left)15 to R (right) 15 and Center,

Default: Center)

q: Right enhanced w : Left enhanced

Fader adjustment

(Setting range: R (rear) 15 to F (front) 15 and Center,

Default: Center)

q: Front enhanced w : Rear enhanced

Subwoofer level adjustment

(Setting range : mute (-∞), -6 dB to +6 dB, 2 dB Step, Default: 0 dB)

q: Up w : Down

English

Audio Setting (when CS

Main volume adjustment

(Setting range: 0 to 40, Default: 18)

q: Up w : Down

Bass adjustment

(Setting range: -12 dB to +12 dB, 2 dB Step, Default: Bass 0 dB)

q: Up w : Down

Treble adjustment

(Setting range: -12 dB to +12 dB, 2 dB Step, Default: Treble 0 dB)

q: Up w : Down

Note: Do not activate SQ and Bass/Treble at same time to avoid causing sound distortion.

Subwoofer Low Pass Filter

(Setting range: Filter OFF, 60 Hz to 160 Hz, 5 Hz Step, Default 120 Hz)

q: Up w : Down

Subwoofer output range

Other speakers output ranges

High Pass Filter

(Setting range: Filter OFF, 90 Hz to 225 Hz, 5 Hz Step, Default: Filter OFF)

q: Up w : Down

Audio Setting

CQ-C8803U31