Panasonic CQ-C8803U Troubleshooting, Problem No playback or Disc ejected Sound skipping or Noise

Troubleshooting

CD

Problem

No playback or

disc ejected

Sound skipping or

noise

Sound skipping due to vibration

Disc unejectable

Possible cause a Possible solution

The disc is inserted upside down.

aInsert a disc correctly.

There is a flaw or foreign material on the disc.

aRemove the foreign material, or use a flawless disc.

There is a flaw or foreign material on the disc.

aRemove the foreign material, or use a flawless disc.

The unit is not sufficiently secured.

aSecure the unit to the console box.

The unit is tilted at over 30˚ in the front-to-end direction.

aMake the angle 30˚ or less.

Something such as a peeled label obstructs the disc coming out.

aPress and hold the [u] (OPEN) for more than 2 seconds when the face plate is open (disc forced ejection). In case that the disc forced ejection does not work, consult your dealer.

The microcontroller in the unit operates abnormally due to noise or other factors.

aUnplug the power cord and plug it again. In case the unit is still out of order, consult your dealer.

MP3/WMA

No playback or

disc ejected

The CD-R/RWs that

are playable on

other devices are

not playable on

this unit.

Sound skipping or

noise

The disc has unplayable formatted data.

aRefer to the description about MP3/WMA for playable sound data except CD- DA (i.e. music CD).

The playability of some CD-R/RWs may depend on the combination of media, recording software and recorder to be used even if these CD-R/RWs are playable on other devices such as a PC.

aMake CD-R/RWs in different combination of media, recording software and recorder after referring to the description about MP3/WMA.

There is a flaw or foreign material on the disc.

aRemove the foreign material, or use a flawless disc. For MP3/WMA, refer to the description about MP3/WMA.

Playing VBR (Variable Bit Rate) files may cause sound skipping.

aPlay Non-VBR files.

38CQ-C8803U