Panasonic CQ-C8803U operating instructions Specifications

Specifications

	Power Supply	DC 12 V (11 V – 16 V), Test Voltage 14.4 V, Negative Ground
	Tone Controls (Bass/Treble)	Bass; ±12 dB at 80 Hz, Treble; ±12 dB at 6 kHz
	Equalizer Center Frequency	62.5, 125, 250, 500, 1 k, 2 k, 4 k, 8 k, 16 k (Hz, default)
	Variable Range of Equalizer	-12 dB to 12 dB (2 dB step)
General	Current Consumption	Less than 2.5 A (CD mode, 0.5 W 4-Speaker)
	Subwoofer-output voltage	5 V (CD mode, 1 kHz, 0 dB)
	Maximum Power Output	70 W x 4 (at 1 kHz)
	Speaker Impedance	4 – 8 Ω
	Pre-amp output voltage	5 V (CD mode, 1 kHz, 0 dB)
	Pre-amp output impedance	60 Ω
	Subwoofer-output impedance	60 Ω
	Dimensions (Main Unit)	178(W) x 50(H) x 155(D) mm {7” x 1 15/16 ”x 6 1/8”}
	Weight (Main Unit)	1.7 kg {3 lbs. 12 oz}
		8 times oversampling
	Sampling Frequency
	Pick-Up Type	Astigma 3-beam
Player	Light Source	Semiconductor laser
	Wavelength	790 nm
	Frequency Response	20 Hz – 20 kHz (±1 dB)
CD	Signal to Noise Ratio	96 dB (2 V), 106 dB (5 V)
	Total Harmonic Distortion	0.01 % (1 kHz)
	Wow and Flutter	Below measurable limits
	Channel Separation	86 dB (5 V)
	FM
	Frequency Range	87.9 MHz – 107.9 MHz
	Usable Sensitivity	12.2 dBf (1.12 µV, 75 Ω)
	50 dB quieting Sensitivity	15.2 dBf (1.59 µV, 75 Ω)
Radio	Frequency Response	30 Hz – 15 kHz (±3 dB)
	Alternate channel selectivity	75 dB (MID)
	Stereo Separation	45 dB (at 1 kHz)
	Image response ratio	75 dB (MID)
	IF response ratio	100 dB (MID)
	Signal to noise ratio	62 dB
	AM
	Frequency Range	530 kHz – 1 710 kHz
	Usable Sensitivity	25 dB/µV (11 V, S/N 20 dB)

English

Notes on discs, Maintenance, Specifications

Power Output:

31 W RMS x 4 Channels at 4 Ω and ≤ 1% THD+N

Signal to Noise Ratio:

80 dBA (reference: 1 W into 4 Ω)

Above Specifications comply with EIA standards.

Notes:

¡Specifications and design are subject to modification without notice due to improvements.

¡Some figures and illustrations in this manual may be different from your product.

CQ-C8803U41