Radio
This chapter explains how to listen to the radio.
1 Press [SRC] (Source) to select the radio mode.
2 Press [BAND] to select a band.
Operation Flow
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.
Preset stations can be simply called up by pressing [}] (P·SET) or [{] (P·SET).
| Notes: | |
| ¡ Direct selection can be executed with [1] to [6] but- | |
| tons on remote control. | |
| ¡ You can switch between 6 and 18 for FM presetting | |
| stations. (EACH BAND/ALL BAND) | |
Preset) | ¡ Preset stations are changeable. (Preset Swap) | |
| ||
Auto Preset Memory (APM) | ||
PresetStation P·SET:Memory,PresetAuto | Stations with good receiving conditions automatically | |
| ||
| preset. | |
| 1 Select a band. | |
| 2 Hold down | |
| [BAND] (APM) | |
| for 2 sec. or | |
(APM: | more. | |
The preset stations under best receiving conditions | ||
| ||
| are received for 5 sec. each after presetting the sta- | |
| tions (SCAN). To stop scanning, press [}] or [{]. |
Note: New stations overwrite existing saved stations.
3 Select a station.
Frequency adjustment
[]] (TUNE): Lower
[[] (TUNE): Higher
Note: Hold down for 0.5 sec. or more and release for station search.
Preset station selection
[{] (P·SET: Preset): Lower preset number
[}] (P·SET: Preset): Higher preset number
Note: Direct selection can be executed with [1] to
[6]buttons on remote control.
Manual station preset
1 Tune in to a station.
2 Hold down [}] or [{] for 2 sec. or more.
3 Select a preset number by pressing
[}] or [{].
Note: If [BAND] is pressed while receiving an FM station, FM broadcasting is changeable among FM 1 to FM 3.
4 Hold down [BAND] (SET) for 2 sec. or more to determine the selection.
Notes:
¡In step 2, a station can be registered by holding down the numeric button [1] to [6] for 2 sec. or more.
¡To stop presetting stations, press [D] (DISP: Display).
¡The operation above allows users to replace the cur- rent station with the station preset in the selected number while selecting a preset station.
English