USING THE UTILITY
USING THE UTILITY
Press the UTILITY button to display the UTILITY screen and make unit settings.
Function buttons | UTILITY |
BROWSE | MIX | EFFECT | UTILITY |
English
Rotary selector dial | Select down () button |
SETTING METHOD
1Use the function buttons to select the item you wish to set [DISPLAY/PC/LANGUAGE/GENERAL].
2Rotate the rotary selector dial to align the cursor with the desired setting item.
3Press either the select down () button or the rotary selector dial to move the icon to the right side.
4Turn the rotary selector dial to select the desired setting value.
5Press the rotary selector dial to confirm the new setting value.
Also, to reset a setting to its default value, press the select up () button.
MEMO
•
SETTINGS
[1] DISPLAY
Use to perform settings for center display and external output.
|
| Factory |
|
| default setting |
|
|
|
LCD BRIGHTNESS | Displays brightness of center |
|
| display. |
|
|
|
|
OEL BRIGHTNESS | Displays brightness of |
|
| display A/B. |
|
|
|
|
LED BRIGHTNESS | Displays brightness of LEDs. |
|
|
|
|
SCREEN SAVE *1 | After the set time without | ON |
| user operation, the LCD and |
|
| OEL screens are dimmed in |
|
| order to preserve the |
|
| displays. |
|
|
|
|
TV STANDARD | Sets signal format for | NTSC (7.5 |
| monitor output (PAL, NTSC | IRE) |
| (7.5 IRE), NTSC (0 IRE). |
|
|
|
|
MONITOR OUT | Sets center display aspect | OFF |
| ratio to letterbox, |
|
| or OFF. |
|
|
|
|
*1 Screen saver operation
•The screensaver operates when five minutes have passed without a track being loaded in either controller.
•The screensaver also operates after 100 minutes passes without any button input when either one or both of the controllers is in pause mode (including cue standby or END display).
•The screen saver is disabled when a track is set with DJ software other than DJS.
•During operation of the screensaver, pressing a button or performing any other command operation will cancel the screensaver.
[2]PC
The MIDI channel can be set (P. 22).
25
En