Installation Guidelines | Pioneer SEP-C1 specs

INSTALLATION GUIDELINES

•Placing and using the unit for long periods on heat-generating sources such as amplifiers or near spotlights, etc. will affect product performance. Avoid placing the unit on heat-generating sources.

•Install this unit as far as possible away from tuners and TV sets. A unit installed in close proximity to such equipment may cause noise or degradation of the picture. Noise may be noticeable when an indoor antenna is used. In such cases, make use of an outdoor antenna or turn off power to the unit.

•When the unit is used in a loud-sound environment, e.g., near a speaker, sound skip may occur. Install the unit away from the speaker or reduce the listening volume.

•Place this unit on a level surface and a stable platform.

•Do not place heavy objects on top of the unit.

Be sure the unit, including USB cable, does not touch vibrating materials. Any cause of vibration other than the insulators may cause sound skip.

Take special care when using the unit while it is installed in a carrying case.

	Do not allow contact
	with vibrating surfaces.
	To assure proper heat-
	dissipation, be sure to
	maintain this open space.
To assure proper	To assure proper
heat-dissipation, be	heat-dissipation, be
sure to maintain this	sure to maintain this
open space.	open space.

About carrying cases

The jog dial is equipped with a delicate switch. If the unit is placed in a carrying case, take precautions to prevent any pressure from being exerted on the surface of the jog dial.

Condensation

When this unit is brought into a warm room from previously cold surroundings or when the room temperature rises sharply, condensation may form inside the unit and impair its performance. In such cases, allow the unit to stand for about an hour or raise the room temperature gradually.

Cleaning the unit

To clean the unit wipe with a polishing or a soft, dry cloth. For stubborn dirt, moisten a soft cloth with a weak solution of neutral detergent (diluted in five to six parts water), wring the cloth well, and wipe away the dirt. Use a dry cloth to wipe the surface dry. Do not use volatile liquids such as benzene or thinner which will damage to the unit.

Cleaning the Jog Dial

To clean the jog dial wipe with a polishing or a soft, dry cloth. For stubborn dirt, moisten a soft cloth with a weak solution of neutral detergent (diluted in five to six parts water), wring the cloth well, and wipe away the dirt. Use a dry cloth to wipe the surface dry.

Applying alcohol, paint thinner, benzene, insecticides, or other stringent substances to the jog dial may cause the markings or finishing of the dial to peel or become discolored, and the use of any such substances should accordingly be avoided.

Installing the SEP-C1 in an EIA rack

The screw holes on the front panel of the SEP-C1 are designed for use in attaching the unit to a 19-inch EIA rack.

This unit complies with 3U specifications. Maximum depth of unit is 83.5 mm.

•Attach the unit to the rack using screws of the appropriate size (screws not provided with the unit).

NOTE

•Do not install the unit immediately above a power amplifier, since damage may occur from the heat produced by the amplifier, or humming or other noise may be caused.

•When transporting the unit, remove the unit from its rack. Attempting to move the rack with the unit installed may result in damage to the unit.

•If the unit must be moved while still in its rack, take precautions to protect the unit from vibration and impact.