Troubleshooting, About the LCD Screen | Pioneer SEP-C1 specification

TROUBLESHOOTING

If you believe the unit is failing to work properly, check the following troubleshooting table for tips. Sometimes simple mistakes in setup or operation may appear like serious problems. There are also times when the problem in question may be caused by something else other than the unit, and at times like these you should check any other electronic devices being used at the same time.

If the problem in question continues to persist even after checking the troubleshooting table below and taking whatever corrective action is recommended, contact your nearest Pioneer Service Station or contact the store from which you purchased the unit for further assistance.

Description of problem	Possible cause of problem	Recommended action

Unit is not recognized even	• Driver software is not installed properly.	• Install the driver software. If it has already been
when connected to computer.	If the unit is not connected properly to the	installed, uninstall it, then install it again.
	computer the version display utility cannot be
	used to display the firmware version. To confirm
	the firmware version, see the section “ABOUT
	THE DRIVER PROGRAM, Confirm the driver
	version” (P. 19).

	• The USB auxiliary power cable is not connected.	• Connect the USB auxiliary power cable to the
		computer first, followed by the USB cable.

During playback, tracks	• LOAD LOCK is set to ON.	• Use UTILITY screen to set LOAD LOCK to OFF.
cannot be loaded.

Track information characters	• A non-supported language font has been used.	• Use a supported language font to input
are garbled.		information. Supported languages include
		western European languages, Russian,
		Simplified Mandarin Chinese, and Japanese.

	• This unit’s track information function cannot be	• Consult the operating instructions for your DJ
	displayed by DJ software.	software program for more information about
		languages supported by the program.

Television screen is disrupted,	• Adverse influence from the unit.	• Either turn the unit’s power OFF, or separate
or noise is heard during FM		farther from the television.
broadcasts.

English

ABOUT THE LCD SCREEN

•Some LCD monitors may display so-called “hot pixels” or “dead pixels” (constantly bright pixels or pixels that are permanently off). This is a phenomenon characteristic of LCD displays and is not considered a malfunction.

•When used in cold regions, the screen may appear dark for a while after the power is first turned on. As the unit warms up with time, the screen will return to normal brightness.

•Avoid viewing the LCD screen in direct sunlight, since the light reflected off the screen may make the image difficult to view.

ABOUT OEL (ORGANIC EL) SCREENS

• The two screens (displays A/B) may display slightly different color characteristics, but this is not a malfunction.

SEP-C1 UPDATES

Software for this unit may be updated to improve operation or functionality. For details consult the following support website: http://www.prodjnet.com/support/