Setup Before Using, About Bluetooth | Alpine KCE-300BT instruction

Setup Before Using

About Bluetooth

Bluetooth is a short distance wireless technology to connect a mobile phone or personal computer. This allows you to enable a hands-free call or transmit data between Bluetooth compatible devices.

•Depending on the Bluetooth version, a Bluetooth compat- ible device may not be able to communicate with this adapter.

•Proper function of this adapter with all Bluetooth compatible devices is not guaranteed.

•Depending on the surroundings, Bluetooth wireless connection may be unstable.

•When you place a call, or perform setup operations, be sure to stop your car in a safe place.

•For details on the control (selection, enter, cancel) from the connected unit, refer to the Owner’s Manual of the respective unit.

•Depending on the connected Bluetooth compatible device(s), the function may differ. Also refer to the Owner’s Manual of the connected device(s).

Before Using Hands-Free Phone/ Audio Function

Before using the hands-free phone/audio function, the following settings need to be made.

1 Be sure to set “INT MUTE” (in the setup function of the connected head unit or Digital Media receiver) to OFF.

•Before making sound interruption on the Bluetooth compatible device, make sure that INT MUTE is set to OFF. (Initial setting on the unit is OFF.)

2 Set “Bluetooth IN” or “Bluetooth” to ADAPTER*. (Refer to the Owner’s Manual of the connected units.)

3 Turn the ignition key off (ACC OFF) and on again (ACC ON).

•Before using a hands-free phone, it must be paired with the adapter. Refer to “Bluetooth SETUP” (pages 4-5).

*If “Bluetooth IN” or “Bluetooth” is set to OFF once, the communication to the adapter is canceled. To resume communication: reset to ADAPTER, set the ignition key from ACC to OFF once, and then to ON again.

*When a Bluetooth compatible device is not used, set

“Bluetooth IN” or “Bluetooth” to OFF, and remove the adapter. If Bluetooth connection of the adapter is maintained, connection (pairing) error to the adapter may occur depending on the mobile phone, and result in malfunction.

How to connect to a Bluetooth compatible device (Pairing)

For details on the control from a Bluetooth compatible device, refer to the Owner’s Manual of the Bluetooth compatible device.

1 Set a Bluetooth connection from a Bluetooth compatible device.

2 The PIN code (“0000”) is displayed on the connected unit.

•The PIN code is fixed as “0000.”

3 Input the PIN code (“0000”) in a Bluetooth compatible device.

4 If the connected unit is successfully connected to a Bluetooth compatible device, a paired device name and a registered number (No. 1 to 4 or guest mode) are displayed on the unit, and then the unit returns to normal mode.

•Set “Setting the Search Mode” (page 5) to ON to enable the KCE-300BT to recognize a mobile phone. For mobile phone passkey (passcode) input operation, refer to the mobile’s Owner’s Manual. Additionally, the mobile phone can be searched directly from an AV head unit. Refer to “Registering the Bluetooth Device (AV Head Unit only)” (page 5).

3-EN