Alpine DVA-9965 owner manual Opening and Closing the Movable Display, Adjusting Volume

Page 11

Opening and Closing the Movable Display

Press c.

The movable display will open.

Adjusting Volume

Turn the Rotary encoder until the desired sound is obtained.

• While in the MENU mode, the volume cannot be adjusted.

To close the movable display, press c again.

The movable display will close.

•Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.

•The display may be dim during low temperature and immediately after turning on the power. The brightness will return to normal as time elapses.

•The display will stop at the set tilt angle when closing.

Caution

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Display Tilt Adjustment

The movable display may be adjusted to 3 different angles depending upon user preference.

1Press MENU.

2Select TILT Adjust by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under TILT Adjust.

3Touch (UP) or (DOWN) on the GlideTouch bar to adjust the display angle.

•Selecting (RETURN) will return to the previous screen.

Movable display

4After setting, press and hold MENU for at least 2 seconds to return to normal mode.

•The adjusted tilt angle of the display is stored in memory. There is no need to re-adjust the tilt angle when the power is turned back on.

•If MENU is pressed while adjusting or setting the items in the MENU mode, the unit will return to the previous selection screen.

•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

Caution

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.

Press MUTE to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing MUTE again will bring the audio back to its previous level.

Detaching and Attaching the Front Panel

Detaching

1Turn off the unit power.

2Press (Release) at the upper left side until the front panel pops out.

3Grasp the left side of the front panel and pull it out.

•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction.

•To protect the front panel, place it in the supplied carrying case.

Attaching

1Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2Push the left side of the front panel until it locks firmly into the main unit.

2

1

•Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

•Attach the front panel carefully. Hold the panel by its sides to avoid pushing any buttons by mistake.

9-EN

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DVA-9965 CHA-1214 CHM-S630 CHA-S634Contents Installation and Connections USE only in Cars with a 12 Volt Negative Ground Operating InstructionsNever Attempt the Following Discs playable on this unit On handling compact discs CD/CD-R/CD-RW Move your finger on the GlideTouch bar to the left or right About the GlideTouch Bar OperationTouch or press the desired position on the GlideTouch bar Initial System Start-Up Turning Power On and OffOpening and Closing the Movable Display Adjusting VolumeDisplay Tilt Adjustment Lowering Volume QuicklyRadio Manual Storing of Station PresetsAutomatic Memory of Station Presets Tuning to Preset StationsPress g or f to select the desired track file Frequency Search FunctionPlayback 11-EN12-EN Press FUNC. to activate the audio function modePress the GlideTouch bar under RPT to select the RPT mode Repeat PlayFile/Folder Name Search concerning MP3/ WMA X. Random PlayScanning Programs Searching from CD Text14-EN Folder Name Search modeFile Name Search mode About MP3/WMA15-EN Terminology16-EN DVD/Video CDPlaying DVD/Video CD If a menu screen appearsFast-forwarding/Fast-reversing Playing Still Frames pausingStopping Playback PRE-STOP Stopping PlaybackVideo CDs with multiplex audio Switching the Audio TracksSwitching the Angle DVD only Chapter/Track/Title Repeat Playback19-EN Switching the Subtitles subtitle language DVD onlyDisplaying the Disc Status DVD only Displaying the Disc Status Video CD onlyFunc Sound SettingGlideTouch bar Operation 20-EN21-EN Selecting the EQ mode Factory settingsSetting Users EQ mode Adjusting and Storing the Parametric Equalizer CurvePress and hold Menu for at least 2 seconds Adjusting and Storing the Graphic Equalizer CurveRecalling the Stored Equalizer Curve 22-ENCrossover Way modeAbout the Crossover 23-ENWAY System Adjusting and Storing the Crossover SettingsPress SOURCE/POWER to adjust the slope Adjust the output level by turning the Rotary encoderExample 2. Listening Position All Seats Recalling the Stored Crossover SettingsAbout Time Correction Example 1. Listening Position Front Left SeatDisplay Setup menu is displayed Setting the Time Correction UnitAdjusting and Storing the Time Correction Press Band to select a speaker to be adjusted27-EN Recalling the Stored Time Correction SettingsSetting the MX Mode Press Title Other FunctionsDisplaying the Text 28-ENRear DVD Function Blackout Mode On and OffSetting the Multicolor Illumination Displaying TimeFile name of download data shall be AU∗∗∗∗∗.MP3 Personalize Data Download OperationAbout i-Personalize Data Download 30-ENInsert a CD-R/CD-RW disc containing data Data DownloadingDownloading the Wallpaper 31-ENPress Setup before inserting a disc, or when in stop mode DVD SetupDVD Setup Operation Setting the languagePress Return repeatedly until the Setup mode is deactivated Setting the TV ScreenSetting the Country Code Setting the Rating Level Parental LockAudio output/Optical digital audio output Setting the Digital OutputSetting contents Bitstream / Lpcm 34-ENENT Custom SetupCustom Setup Operation 35-EN36-EN Setup OperationGeneral Setting 37-EN Audio SettingDisplay Setting 38-EN Demo SettingChecking the SAT Radio ID Number Storing Channel PresetsSAT Radio Receiver Optional Receiving Channels with the SAT Radio Receiver OptionalChannel/Category Search Function Setting the Auxiliary Data Field DisplayReceiving Stored Channels Changing the Display41-EN Searching for a desired SongSearching by Playlist Searching by artist name42-EN Quick SearchRandom Play Shuffle M.I.X Searching by album nameEach press changes the display RPT mode is canceled by selecting off43-EN Song will be played back repeatedlyMulti-Changer Selection Optional Changer OptionalControlling CD Changer Optional Playing MP3 Files with the CD Changer Optional45-EN Adjustment Procedure for Dolby Surround46-EN Setting the SpeakersSet MX Mode of the External Audio Processor Over Adjustment= distance of farthest speaker Distance of other speakers Performing Time Correction Manually TCR/ Phase SwitchingCalculating the Time Correction 47-EN48-EN Graphic Equalizer AdjustmentsSwitching the Phase Inputting the Time Correction49-EN Parametric Equalizer AdjustmentsSetting Bass Compressor Speaker Setup50-EN Setting of Dolby DigitalAdjusting the speaker levels Output Level Mixing bass sound to the rear channel Rear MIXBI-PHANTOM ON/OFF Adjusting the DVD LevelAdjusting the acoustic image BI-PHANTOM 51-ENSelecting the Center Width Using the Pro Logic II Mode52-EN 53-EN Storing Settings in the MemoryGetting out the Preset Memory 54-EN Remote ControlControls on Remote Control 55-EN When Using the Remote ControlBattery Replacement 56-EN InformationAbout DVDs Linear PCM audio Lpcm TerminologyDolby Digital Dolby Pro LogicFor details, see List of Language Codes58-EN 59-EN List of Country Codes60-EN CD/MP3/WMA/DVD/Video CD Case of DifficultyBasic RadioPicture is unclear or noisy Indication for CD PlayerIndication for DVD/Video CD Player 62-ENSirius to Indication for SAT Receiver ModeIndication for CD Changer 63-EN64-EN SpecificationsIndication for iPod Mode 65-EN Installation and ConnectionsRemoval Accessory List66-EN Slide the mounting sleeve into the dashboard67-EN Installing the Power Supply UnitWhen mounting with Velcro fasteners 68-EN Connections69-EN Antenna Receptacle Power Antenna Lead BlueConnect the External Monitor System Example70-EN To prevent noise/interference in the audio system 71-ENLimited Warranty Page Page Page
Top Page Image Contents