•The
•A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit.
•The track display for MP3/WMA data playback is the file numbers recorded on the disc.
•If the
•The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.
•With the
MP3/WMA Play Display
The folder number, file number, sampling rate, and bit rate will be displayed as described below.
File number
Folder number display display
19 20
44.1 kHz
Sampling rate display
The sampling rate and the bit rate (frame display) are alternately displayed.*
File number display
Folder number display
19 20
192 kbps
Bit rate display
•Press TITLE to switch the display. Please see “Displaying the Text” (page 28) for information about display switching.
*The recording sampling rate and bit rate of the MP3/WMA file are displayed. A WMA file of variable bit rate displays the average bit rate.
Repeat Play
1Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode → Source operation mode → Source select mode
2Press the GlideTouch bar under RPT to select the RPT mode.
The track (file) will be played back repeatedly.
CD mode:
RPT | : Only a track is repeatedly played back |
↓
RPT : A disc is repeatedly played back
↓
(off)*1
*1 When a CD changer is connected.
•If REPEAT is set to ON during M.I.X. play in CD changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode:
RPT | : Only a file is repeatedly played back |
↓
RPT : Only files in a folder are repeatedly played back
↓
RPT : A disc is repeatedly played back
↓
(off)*2
*2 When an MP3 compatible CD changer is connected.
•The function mode you previously recalled can be recalled again if the GlideTouch bar is touched.
•If no operation is performed for 10 seconds, the audio function mode turns off.
•When a file is moved up or down in the RPT mode, audio files in other folders are played back repeatedly.