Alpine DVA-9965 owner manual Sound Setting, GlideTouch bar Operation, 20-EN, Func

GlideTouch bar Operation

The GlideTouch bar controls the same functions as the unit buttons and remote control.

1Press FUNC. then select the desired mode.

Source select mode →

Audio function mode 1* (;, :, ENT., etc.) → Audio function mode 2 (AUDIO, RPT, etc.) → Source operation mode (g, f , etc.) → Source select mode

* DVD mode only.

2The function guide of the selected mode is displayed.

3Press the position on the GlideTouch bar which corresponds to the function guide in the display.

Source Operation Mode <DVD/Video CD mode>

L	Stopping Playback (PRE-STOP)	pgae17
L	Stopping Playback	page17
(/)	Fast-forward/Fast-reverse	page17
g/f	Find the Beginning of Chapters or Tracks	page17
:	Playback	page17
J	Still (pause)	page17
g/f	Forward/Reverse frame-by-frame playback	page17
(/)	Slow Motion Playback	page17

Audio Function Mode <DVD mode>

;/:/8/9/			Selection button when the menu display is	page16
ENT.			indicated.
RTN			Return to the previous display
			(Depending on the disc, it may not be possible to
			return to the previous display.)
	C
	FUNC.	Press FUNC. to change.
	B
	TOP.M		Recall the top menu display	page16
	MENU		Recall the menu display	page16
	AUDIO		Switching the Audio Tracks	page18
	SUBT.		Switching the Subtitles	page19
	ANGLE		Change the angle	page18
	RPT		Chapter/Title repeat playback	page18
<Video CD mode>
	AUDIO		Change audio output	page18
	RPT		Chapter/Track repeat playback	page18
	PBC		Set Video CD playback mode	page35
	RTN		Return to the previous display
			(Depending on the disc, it may not be possible to
			return to the previous display.)

Sound Setting

SOURCE/
POWER	BAND	Rotary encoder (MODE)

g MENU f FUNC. GlideTouch bar

Adjusting Balance (Between Left and Right)/ Fader (Between Front and Rear)/Defeat

1Press the Rotary encoder (MODE) repeatedly to choose the desired mode.

Each press changes the mode as follows:

SUBWOOFER*1 → BALANCE → FADER → DEFEAT → VOLUME → SUBWOOFER*1

Subwoofer : 0 ~ +15

Balance : L15 ~ R15

Fader : R15 ~ F15

Defeat : ON/OFF

Volume : 0 ~ 35

Press g or f after selecting the Subwoofer mode, and the subwoofer output phase is switched NORMAL (PHASE 0°) or REVERS (PHASE 180°).

•If the Rotary encoder (MODE) is not pressed within 5 seconds after selecting the BALANCE, FADER, DEFEAT or SUBWOOFER mode, the unit automatically returns to normal mode.

•If you set the 2WAY/3WAY switch (pages 68, 69 and 71) to 3WAY, you cannot adjust the FADER mode.

*1 When the subwoofer mode is set to OFF, its level and phase cannot be adjusted.

2Turn the Rotary encoder (MODE) until the desired sound is obtained in each mode.

By setting Defeat ON, previously adjusted settings of EQ will return to the factory defaults and MX is turned off.

•If an external audio processor is connected, refer to “External Audio Processor (Optional)” (pages 45 to 53)

20-EN