Alpine DVA-9965 owner manual Audio Setting, Display Setting, 37-EN

Page 39

Turning Mute Mode On/Off

Setting item: INT MUTE

Setting contents: ON (Initial setting) / OFF

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.

Setting Tone Defeat for External Devices

Setting item: INT AUDIO

Setting contents: ON / OFF (Initial setting)

When inputting external devices to this unit, turning tone defeat on will bypass EQ and MX, i.e., sound for external devices is output at the default setting.

Setting the AUX Mode (V-Link)

Setting item: AUX IN

Setting contents: ON / OFF (Initial setting)

You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA- 410C) to this component.

You can change the AUX name display when AUX ON is set. Select the AUX name by sliding your finger on the GlideTouch bar to the left or right. Then press the GlideTouch bar.

If the KCA-410C is connected, it is possible to select two AUX names.

•Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/POWER to select AUX mode and then press BAND to select your desired device.

Setting the Digital Output

Setting item: OPTICAL OUT

Setting contents: ON / OFF (Initial setting)

To connect an optical digital compatible audio processor other than Alpine, optical digital output must be set to ON.

•After input selection is completed, turn the ignition off and back on again. The digital output is set.

Audio Setting

Audio is selected on the setup main menu in step 3.

Subwoofer On and Off

Setting item: SUBWOOFER

Setting contents: ON (Initial setting) / OFF

When the subwoofer is on, perform the steps below to adjust the subwoofer output phase and level.

1Press the Rotary encoder repeatedly to select the SUBWOOFER mode.

SUBWOOFER → BALANCE → FADER → DEFEAT → VOLUME → SUBWOOFER

•If you set the 2WAY/3WAY switch (pages 68, 69 and 71) to 3WAY, you cannot adjust the FADER mode.

2Press g or f.

The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or SUBWOOFER REVERS (180°).

To adjust the level, turn the Rotary encoder.

Setting the Response Slope for the High Range Speaker

Setting item: TW SETUP

Setting contents: MAKER’S (Initial setting) / USER’S

Depending on the response characteristics of the speaker, care should be taken when setting the response slope of the high range speaker to FLAT in 3-way mode (see “Adjusting and Storing the Crossover Settings” on page 24), as speaker damage may result.

MAKER’S : As protection from possible speaker damage, FLAT cannot be set for the response slope of the high range speaker in 3-way mode.

USER’S : The FLAT setting is possible in 3-way mode.

•A message is displayed when the response slope for the high range speaker is set to FLAT in 3-way mode.

Display Setting

The display is selected on the setup main menu in step 3.

Dimmer Control

Setting item: DIMMER

Setting contents: AUTO (Initial setting) / MANUAL

AUTO : When the headlights are turned on, the display decreases the illumination, and the brightness level which is set in “Setting the Display Dimmer” (this page) is set.

MANUAL : Regardless of the headlights being on or off, the display decreases the illumination, and the brightness level which is set in “Setting the Display Dimmer” (this page) is set.

Setting the Display Dimmer

Setting item: DIMMER LEVEL

Setting contents: Level1 / Level2 (Initial setting) / Level3

In the display Dimmer AUTO setting, three levels are available, the lowest level (LEVEL 1) being the brightest when the car headlights are on.

37-EN

Page 38 Page 40
Image 39
Page 38 Page 40
Contents DVA-9965 CHA-1214 CHM-S630 CHA-S634Contents Installation and Connections USE only in Cars with a 12 Volt Negative Ground Operating InstructionsNever Attempt the Following Discs playable on this unit On handling compact discs CD/CD-R/CD-RW About the GlideTouch Bar Operation Touch or press the desired position on the GlideTouch barMove your finger on the GlideTouch bar to the left or right Initial System Start-Up Turning Power On and OffOpening and Closing the Movable Display Adjusting VolumeDisplay Tilt Adjustment Lowering Volume QuicklyRadio Manual Storing of Station PresetsAutomatic Memory of Station Presets Tuning to Preset StationsPress g or f to select the desired track file Frequency Search FunctionPlayback 11-EN12-EN Press FUNC. to activate the audio function modePress the GlideTouch bar under RPT to select the RPT mode Repeat PlayFile/Folder Name Search concerning MP3/ WMA X. Random PlayScanning Programs Searching from CD Text14-EN Folder Name Search modeFile Name Search mode About MP3/WMA15-EN Terminology16-EN DVD/Video CDPlaying DVD/Video CD If a menu screen appearsFast-forwarding/Fast-reversing Playing Still Frames pausingStopping Playback PRE-STOP Stopping PlaybackVideo CDs with multiplex audio Switching the Audio TracksSwitching the Angle DVD only Chapter/Track/Title Repeat Playback19-EN Switching the Subtitles subtitle language DVD onlyDisplaying the Disc Status DVD only Displaying the Disc Status Video CD onlyFunc Sound SettingGlideTouch bar Operation 20-EN21-EN Selecting the EQ mode Factory settingsSetting Users EQ mode Adjusting and Storing the Parametric Equalizer CurvePress and hold Menu for at least 2 seconds Adjusting and Storing the Graphic Equalizer CurveRecalling the Stored Equalizer Curve 22-ENCrossover Way modeAbout the Crossover 23-ENWAY System Adjusting and Storing the Crossover SettingsPress SOURCE/POWER to adjust the slope Adjust the output level by turning the Rotary encoderExample 2. Listening Position All Seats Recalling the Stored Crossover SettingsAbout Time Correction Example 1. Listening Position Front Left SeatDisplay Setup menu is displayed Setting the Time Correction UnitAdjusting and Storing the Time Correction Press Band to select a speaker to be adjustedRecalling the Stored Time Correction Settings Setting the MX Mode27-EN Press Title Other FunctionsDisplaying the Text 28-ENRear DVD Function Blackout Mode On and OffSetting the Multicolor Illumination Displaying TimeFile name of download data shall be AU∗∗∗∗∗.MP3 Personalize Data Download OperationAbout i-Personalize Data Download 30-ENInsert a CD-R/CD-RW disc containing data Data DownloadingDownloading the Wallpaper 31-ENPress Setup before inserting a disc, or when in stop mode DVD SetupDVD Setup Operation Setting the languagePress Return repeatedly until the Setup mode is deactivated Setting the TV ScreenSetting the Country Code Setting the Rating Level Parental Lock Audio output/Optical digital audio output Setting the Digital Output Setting contents Bitstream / Lpcm 34-ENENT Custom SetupCustom Setup Operation 35-ENSetup Operation General Setting36-EN Audio Setting Display Setting37-EN 38-EN Demo SettingChecking the SAT Radio ID Number Storing Channel PresetsSAT Radio Receiver Optional Receiving Channels with the SAT Radio Receiver OptionalChannel/Category Search Function Setting the Auxiliary Data Field DisplayReceiving Stored Channels Changing the Display41-EN Searching for a desired SongSearching by Playlist Searching by artist name42-EN Quick SearchRandom Play Shuffle M.I.X Searching by album nameEach press changes the display RPT mode is canceled by selecting off43-EN Song will be played back repeatedlyMulti-Changer Selection Optional Changer OptionalControlling CD Changer Optional Playing MP3 Files with the CD Changer Optional45-EN Adjustment Procedure for Dolby Surround46-EN Setting the SpeakersSet MX Mode of the External Audio Processor Over Adjustment= distance of farthest speaker Distance of other speakers Performing Time Correction Manually TCR/ Phase SwitchingCalculating the Time Correction 47-EN48-EN Graphic Equalizer AdjustmentsSwitching the Phase Inputting the Time Correction49-EN Parametric Equalizer AdjustmentsSetting Bass Compressor Speaker Setup50-EN Setting of Dolby DigitalAdjusting the speaker levels Output Level Mixing bass sound to the rear channel Rear MIXBI-PHANTOM ON/OFF Adjusting the DVD LevelAdjusting the acoustic image BI-PHANTOM 51-ENUsing the Pro Logic II Mode 52-ENSelecting the Center Width Storing Settings in the Memory Getting out the Preset Memory53-EN Remote Control Controls on Remote Control54-EN When Using the Remote Control Battery Replacement55-EN Information About DVDs56-EN Linear PCM audio Lpcm TerminologyDolby Digital Dolby Pro LogicList of Language Codes 58-ENFor details, see 59-EN List of Country Codes60-EN CD/MP3/WMA/DVD/Video CD Case of DifficultyBasic RadioPicture is unclear or noisy Indication for CD PlayerIndication for DVD/Video CD Player 62-ENSirius to Indication for SAT Receiver ModeIndication for CD Changer 63-ENSpecifications Indication for iPod Mode64-EN 65-EN Installation and ConnectionsRemoval Accessory List66-EN Slide the mounting sleeve into the dashboardInstalling the Power Supply Unit When mounting with Velcro fasteners67-EN 68-EN Connections69-EN Antenna Receptacle Power Antenna Lead BlueSystem Example 70-ENConnect the External Monitor To prevent noise/interference in the audio system 71-ENLimited Warranty Page Page Page
Top Page Image Contents