Installing the Power Supply Unit
Caution
Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.
Air ventilation hole
<Side of the Power Supply Unit>
When mounting with Velcro fasteners
When mounting the Power Supply Unit with the Velcro fasteners, be sure to choose a flat location.
Do not hang the unit from the bottom of the dashboard or rear deck with the Velcro fasteners.
1Remove the Protective paper and attach two pieces of Velcro fastener to the bottom of the Power Supply Unit.
| Power Supply Unit |
| Protective paper |
| Velcro Fasteners |
Protective paper | (Included) |
2Check the position, and then fix the Power Supply Unit to the floor carpet.
When mounting with Screws
When mounting the Power Supply Unit with the screws, be sure to choose a flat location.
When making holes, be careful not to scratch any pipes or wires.
Install the Power Supply Unit on the floor with the supplied
Power Supply Unit