Radio
SOURCE/ TUNE/
POWER A.ME BAND
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
gf |
| GlideTouch bar | ||||||
| ||||||||
|
|
|
|
|
| FUNC. | ||
The unit is equipped with IBOC (In Band On Channel) and can receive HD Radio™ signals (digital terrestrial radio).
Listening to Radio
1Press SOURCE/POWER until a radio frequency appears in the display.
2Press BAND repeatedly until the desired radio band is displayed.
3Press TUNE/A.ME to select the tuning mode.
DX (Distance mode) → LOCAL (Local mode) →
MANUAL (Manual mode) → DX
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4Press g or f to tune in the desired station. Holding down g or f will change the frequency continuously.
•The ST indicator appears on the display when a stereo FM station is tuned in.
•“DIGITAL” is displayed when a digital radio station is received.
•With the
Manual Storing of Station Presets
1Select the radio band and tune in a desired radio station you wish to store in the preset memory.
2Press FUNC. to activate the preset mode.
Source select mode → Preset mode →
Source operation mode → Source select mode
3Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press and hold the GlideTouch bar for at least 2 seconds under the selected preset number.
The selected station is stored.
•A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM).
•If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.
Automatic Memory of Station Presets
1Press BAND repeatedly until the desired radio band is displayed.
2Press and hold TUNE/A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1.
•If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1Press BAND repeatedly until the desired band is displayed.
2Press FUNC. to activate the preset mode.
Source select mode → Preset mode →
Source operation mode → Source select mode
3Select any one of the preset numbers (1 through 6) by sliding your finger to the left or right on the GlideTouch bar. Press the GlideTouch bar under the selected preset number.
The display shows the band, preset number and frequency of the station selected.