Searching Directly by Chapter or Track Number
Use this function to easily move to the beginning of the chapters or tracks on the disc.
• This operation is performed by the remote control unit.
1During playback or
2Press ENT.
Playback starts from the selected chapter or track.
•This function cannot be used on discs on which no chapter numbers are recorded.
•The beginning of a track number cannot be directly found on the Video CD equipped with PBC (playback control). Set VCD PLAY MODE to turn the PBC function off. Refer to “Setting the Video CD Play Mode” (page 35).
•Depending on the number of digits input, playback may start automatically even if ENT. is not pressed in step 2.
•Press CLR to delete the last digit in the chapter/track number. Press and hold CLR for at least 2 seconds to clear “Chapter” and “Track” numbers.
•Press RETURN to cancel the chapter/track search mode and resume normal playback.
Chapter/Track/Title Repeat Playback
Use this function to play the disc’s titles, chapters or tracks repeatedly.
1Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode 1* → Audio function mode 2 → Source operation mode → Source select mode
* DVD mode only.
2Press the GlideTouch bar under RPT to select the RPT mode.
The repeat mode switches each time the button is pressed.
Switching the Audio Tracks
DVDs can have up to 8 different audio tracks. These alternate tracks can be switched during playback.
• This operation is performed by the remote control unit.
During playback, press AUDIO.
The sound switches between the alternate audio tracks recorded on the disc each time the button is pressed.
•The selected audio track becomes the default setting every time the power is turned on or the disc is replaced. If a disc does not include the language you selected for the default audio track, the disc’s default language is selected instead. Refer to “Setting the language” (page 32).
•Not all discs will allow changing the alternate audio tracks during playback. In these cases, select audio tracks from the DVDs menu.
•There may be a delay before the selected alternate track begins to play.
Video CDs with multiplex audio
During playback, press AUDIO.
The left and right channels will be output as shown in the figure below, each time the button is pressed.
LR → LL → RR → LR
Switching the Angle (DVD only)
On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.
• This operation is performed by the remote control unit.
During playback, press ANGLE.
The angle switches between the angles recorded on the disc each time the button is pressed.
• | Some time may be required for the angle to change. |
• | Depending on the disc, the angle may switch in one of two ways. |
DVD
↓
RPT CHAPT
↓
RPT TITLE
↓
RPT OFF
The chapter is played repeatedly.
The title is played repeatedly.
The mode returns to normal playback. (Factory default)
- Seamless: The angle switches smoothly. |
- |
displayed first, after which the angle switches. |
•By pressing GlideTouch bar under RPT for more than 2 seconds, the unit will switch to REPEAT OFF.
VIDEO CD
↓
RPT TRACK
↓
RPT DISC
↓
RPT OFF
*
The track is played repeatedly.
The entire disc is played repeatedly. (Factory default)
Playback does not repeat.
* Displayed only in the changer mode.
•The track/disc repeat modes cannot be used on video CDs with playback control (PBC). Set VCD PLAY MODE to turn the PBC function off. Refer to “Setting the Video CD Play Mode” (page 35).
•For some discs it is not possible to switch the repeat mode.