Alpine DVA-9965 Frequency Search Function, Playback, 11-EN, To eject the disc, press c

Page 13

Frequency Search Function

You can search for a radio station by its frequency.

1Press and hold for at least 2 seconds in Radio mode to activate Frequency Search mode.

2Within 10 seconds, select the desired frequency by sliding your finger to the left or right on the GlideTouch bar. Press the GlideTouch bar under the desired frequency.

The radio station on the frequency selected is received.

Frequency Search mode is canceled by pressing and holding for at least 2 seconds.

If either side of the GlideTouch bar is touched and held, the frequencies are scrolled continuously.

CD/MP3/WMA

SOURCE/POWER

TITLE

-/J

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

f

FUNC. 9

GlideTouch bar

g

 

c

Playback

1Press c.

The movable display will open.

2Insert a disc with the label side facing up. The disc will be pulled into the unit automatically.

The movable display will close and playback will begin. When a disc is already inserted, press SOURCE/POWER to switch to the DISC mode.

The mode will change every time the button is pressed.

DISC TUNER CD CHANGER* DISC

* Only when the CD changer is connected

3While playing back MP3/WMA, press 8 or 9 to select the desired folder.

Pressing and holding 8 or 9 will change folders continuously.

4Press g or f to select the desired track (file).

Returning to the beginning of the current track (file):

Press g.

Fast backward:

Press and hold g.

Advancing to the beginning of the next track (file):

Press f.

Fast forward:

Press and hold f.

5To pause playback, press -/J.Pressing -/Jagain will resume playback.

6To eject the disc, press c.

Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either.

If the CD does not eject, press and hold c for at least 2 seconds with the movable display open.

Continued

11-EN

Image 13
Contents DVA-9965 CHA-1214 CHM-S630 CHA-S634Contents Installation and Connections USE only in Cars with a 12 Volt Negative Ground Operating InstructionsNever Attempt the Following Discs playable on this unit On handling compact discs CD/CD-R/CD-RW Touch or press the desired position on the GlideTouch bar About the GlideTouch Bar OperationMove your finger on the GlideTouch bar to the left or right Initial System Start-Up Turning Power On and OffDisplay Tilt Adjustment Adjusting VolumeLowering Volume Quickly Opening and Closing the Movable DisplayAutomatic Memory of Station Presets Manual Storing of Station PresetsTuning to Preset Stations RadioPlayback Frequency Search Function11-EN Press g or f to select the desired track filePress the GlideTouch bar under RPT to select the RPT mode Press FUNC. to activate the audio function modeRepeat Play 12-ENScanning Programs X. Random PlaySearching from CD Text File/Folder Name Search concerning MP3/ WMAFile Name Search mode Folder Name Search modeAbout MP3/WMA 14-EN15-EN TerminologyPlaying DVD/Video CD DVD/Video CDIf a menu screen appears 16-ENStopping Playback PRE-STOP Playing Still Frames pausingStopping Playback Fast-forwarding/Fast-reversingSwitching the Angle DVD only Switching the Audio TracksChapter/Track/Title Repeat Playback Video CDs with multiplex audioDisplaying the Disc Status DVD only Switching the Subtitles subtitle language DVD onlyDisplaying the Disc Status Video CD only 19-ENGlideTouch bar Operation Sound Setting20-EN FuncSetting Users EQ mode Selecting the EQ mode Factory settingsAdjusting and Storing the Parametric Equalizer Curve 21-ENRecalling the Stored Equalizer Curve Adjusting and Storing the Graphic Equalizer Curve22-EN Press and hold Menu for at least 2 secondsAbout the Crossover Way mode23-EN CrossoverPress SOURCE/POWER to adjust the slope Adjusting and Storing the Crossover SettingsAdjust the output level by turning the Rotary encoder WAY SystemAbout Time Correction Recalling the Stored Crossover SettingsExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsAdjusting and Storing the Time Correction Setting the Time Correction UnitPress Band to select a speaker to be adjusted Display Setup menu is displayedSetting the MX Mode Recalling the Stored Time Correction Settings27-EN Displaying the Text Other Functions28-EN Press TitleSetting the Multicolor Illumination Blackout Mode On and OffDisplaying Time Rear DVD FunctionAbout i-Personalize Data Download Personalize Data Download Operation30-EN File name of download data shall be AU∗∗∗∗∗.MP3Downloading the Wallpaper Data Downloading31-EN Insert a CD-R/CD-RW disc containing dataDVD Setup Operation DVD SetupSetting the language Press Setup before inserting a disc, or when in stop modeSetting the Country Code Setting the TV ScreenSetting the Rating Level Parental Lock Press Return repeatedly until the Setup mode is deactivatedSetting contents Bitstream / Lpcm Setting the Digital Output34-EN Audio output/Optical digital audio outputCustom Setup Operation Custom Setup35-EN ENTGeneral Setting Setup Operation36-EN Display Setting Audio Setting37-EN 38-EN Demo SettingSAT Radio Receiver Optional Storing Channel PresetsReceiving Channels with the SAT Radio Receiver Optional Checking the SAT Radio ID NumberReceiving Stored Channels Setting the Auxiliary Data Field DisplayChanging the Display Channel/Category Search FunctionSearching by Playlist Searching for a desired SongSearching by artist name 41-ENRandom Play Shuffle M.I.X Quick SearchSearching by album name 42-EN43-EN RPT mode is canceled by selecting offSong will be played back repeatedly Each press changes the displayControlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection Optional45-EN Adjustment Procedure for Dolby SurroundSet MX Mode of the External Audio Processor Setting the SpeakersOver Adjustment 46-ENCalculating the Time Correction Performing Time Correction Manually TCR/ Phase Switching47-EN = distance of farthest speaker Distance of other speakersSwitching the Phase Graphic Equalizer AdjustmentsInputting the Time Correction 48-ENSetting Bass Compressor Parametric Equalizer AdjustmentsSpeaker Setup 49-ENAdjusting the speaker levels Output Level Setting of Dolby DigitalMixing bass sound to the rear channel Rear MIX 50-ENAdjusting the acoustic image BI-PHANTOM Adjusting the DVD Level51-EN BI-PHANTOM ON/OFF52-EN Using the Pro Logic II ModeSelecting the Center Width Getting out the Preset Memory Storing Settings in the Memory53-EN Controls on Remote Control Remote Control54-EN Battery Replacement When Using the Remote Control55-EN About DVDs Information56-EN Dolby Digital TerminologyDolby Pro Logic Linear PCM audio Lpcm58-EN List of Language CodesFor details, see 59-EN List of Country Codes60-EN Basic Case of DifficultyRadio CD/MP3/WMA/DVD/Video CDIndication for DVD/Video CD Player Indication for CD Player62-EN Picture is unclear or noisyIndication for CD Changer Indication for SAT Receiver Mode63-EN Sirius toIndication for iPod Mode Specifications64-EN 65-EN Installation and Connections66-EN Accessory ListSlide the mounting sleeve into the dashboard RemovalWhen mounting with Velcro fasteners Installing the Power Supply Unit67-EN 68-EN Connections69-EN Antenna Receptacle Power Antenna Lead Blue70-EN System ExampleConnect the External Monitor To prevent noise/interference in the audio system 71-ENLimited Warranty Page Page Page