Alpine DVA-9965 owner manual Indication for CD Player, Indication for DVD/Video CD Player, 62-EN

Page 64

Picture is unclear or noisy.

•Disc is being fast-forwarded or fast-reversed.

-The picture may be unclear, but this is normal.

•Vehicle’s battery power is weak.

-Check the battery power and wiring.

(The unit may malfunction if the battery power is under 11 volts with a load applied.)

•Monitor’s fluorescent tube is worn out.

-Replace the monitor’s fluorescent tube.

Image stops sometimes.

•Disc is scratched.

- Replace with a non-scratched disc.

Indication for CD Player

HI TEMP

•Protective circuit is activated due to high temperature.

-The indicaton will disappear when the temperature returns to normal operating range.

NO DISC

•No CD is inserted.

-Insert a CD.

•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

Press the c button again for at least 2 seconds.

If the disc still does not eject, consult your Alpine dealer.

Indication for DVD/Video CD Player

 

 

 

DISC ERROR

 

ERROR

 

 

(Audio display)

 

 

 

(Monitor display)

•Mechanism error.

1)Press c and eject the disc.

If the disc does not eject, press c again for at least 2 seconds and eject the disc.

If the disc still does not eject, consult your Alpine dealer.

2)When the error indication remains after ejecting, press c again.

If the error indication still does not turn off after pressing c a few times, consult your Alpine dealer.

NO DISC

NO DISC

(Audio display)

(Monitor display)

•No disc is inserted.

-Insert a disc.

•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following step: Press c again for at least 2 seconds.

ERROR

•Mechanism error.

1)Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2)When the error indication remains after ejecting, press the c button again.

If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.

•When “ERROR” is displayed:

If that the disc cannot be ejected by pressing c, press the RESET switch (refer to page 8) and press c again.

If the disc still cannot be ejected, consult your Alpine dealer.

PROTECT

•A copy-protected WMA file was played back.

- You can only play back non-copy-protected files.

(Monitor display)

•Remote control operation is not possible.

-For some discs or playing modes, certain operations are not possible. This is not a malfunction.

 

 

 

 

 

 

ERROR

 

REGIONAL CODE

 

(Audio display)

VIOLATION

 

 

 

 

 

 

 

 

(Monitor display)

•Disc does not match regional code number.

- Load a disc that matches the regional code number.

UNSUPPORT

•The disc is not written in a MP3/WMA supported format. - Use a disc written at the MP3/WMA supported format.

 

 

 

HI-TEMP

 

HI TEMP

 

 

(Audio display)

 

 

 

(Monitor display)

•Protective circuit is activated at high temperature.

-The indicaton will disappear when the temperature returns to normal operating range.

-Leave the power OFF until the temperature decreases and then turn the power ON again.

62-EN

Page 63 Page 65
Image 64
Page 63 Page 65
Contents DVA-9965 CHA-S634 CHA-1214 CHM-S630Contents Installation and Connections Operating Instructions USE only in Cars with a 12 Volt Negative GroundNever Attempt the Following Discs playable on this unit On handling compact discs CD/CD-R/CD-RW Touch or press the desired position on the GlideTouch bar About the GlideTouch Bar OperationMove your finger on the GlideTouch bar to the left or right Turning Power On and Off Initial System Start-UpAdjusting Volume Display Tilt AdjustmentLowering Volume Quickly Opening and Closing the Movable DisplayManual Storing of Station Presets Automatic Memory of Station PresetsTuning to Preset Stations RadioFrequency Search Function Playback11-EN Press g or f to select the desired track filePress FUNC. to activate the audio function mode Press the GlideTouch bar under RPT to select the RPT modeRepeat Play 12-ENX. Random Play Scanning ProgramsSearching from CD Text File/Folder Name Search concerning MP3/ WMAFolder Name Search mode File Name Search modeAbout MP3/WMA 14-ENTerminology 15-ENDVD/Video CD Playing DVD/Video CDIf a menu screen appears 16-ENPlaying Still Frames pausing Stopping Playback PRE-STOPStopping Playback Fast-forwarding/Fast-reversingSwitching the Audio Tracks Switching the Angle DVD onlyChapter/Track/Title Repeat Playback Video CDs with multiplex audioSwitching the Subtitles subtitle language DVD only Displaying the Disc Status DVD onlyDisplaying the Disc Status Video CD only 19-ENSound Setting GlideTouch bar Operation20-EN FuncSelecting the EQ mode Factory settings Setting Users EQ modeAdjusting and Storing the Parametric Equalizer Curve 21-ENAdjusting and Storing the Graphic Equalizer Curve Recalling the Stored Equalizer Curve22-EN Press and hold Menu for at least 2 secondsWay mode About the Crossover23-EN CrossoverAdjusting and Storing the Crossover Settings Press SOURCE/POWER to adjust the slopeAdjust the output level by turning the Rotary encoder WAY SystemRecalling the Stored Crossover Settings About Time CorrectionExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsSetting the Time Correction Unit Adjusting and Storing the Time CorrectionPress Band to select a speaker to be adjusted Display Setup menu is displayedSetting the MX Mode Recalling the Stored Time Correction Settings27-EN Other Functions Displaying the Text28-EN Press TitleBlackout Mode On and Off Setting the Multicolor IlluminationDisplaying Time Rear DVD FunctionPersonalize Data Download Operation About i-Personalize Data Download30-EN File name of download data shall be AU∗∗∗∗∗.MP3Data Downloading Downloading the Wallpaper31-EN Insert a CD-R/CD-RW disc containing dataDVD Setup DVD Setup OperationSetting the language Press Setup before inserting a disc, or when in stop modeSetting the TV Screen Setting the Country CodeSetting the Rating Level Parental Lock Press Return repeatedly until the Setup mode is deactivatedSetting the Digital Output Setting contents Bitstream / Lpcm34-EN Audio output/Optical digital audio outputCustom Setup Custom Setup Operation35-EN ENTGeneral Setting Setup Operation36-EN Display Setting Audio Setting37-EN Demo Setting 38-ENStoring Channel Presets SAT Radio Receiver OptionalReceiving Channels with the SAT Radio Receiver Optional Checking the SAT Radio ID NumberSetting the Auxiliary Data Field Display Receiving Stored ChannelsChanging the Display Channel/Category Search FunctionSearching for a desired Song Searching by PlaylistSearching by artist name 41-ENQuick Search Random Play Shuffle M.I.XSearching by album name 42-ENRPT mode is canceled by selecting off 43-ENSong will be played back repeatedly Each press changes the displayChanger Optional Controlling CD Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalAdjustment Procedure for Dolby Surround 45-ENSetting the Speakers Set MX Mode of the External Audio ProcessorOver Adjustment 46-ENPerforming Time Correction Manually TCR/ Phase Switching Calculating the Time Correction47-EN = distance of farthest speaker Distance of other speakersGraphic Equalizer Adjustments Switching the PhaseInputting the Time Correction 48-ENParametric Equalizer Adjustments Setting Bass CompressorSpeaker Setup 49-ENSetting of Dolby Digital Adjusting the speaker levels Output LevelMixing bass sound to the rear channel Rear MIX 50-ENAdjusting the DVD Level Adjusting the acoustic image BI-PHANTOM51-EN BI-PHANTOM ON/OFF52-EN Using the Pro Logic II ModeSelecting the Center Width Getting out the Preset Memory Storing Settings in the Memory53-EN Controls on Remote Control Remote Control54-EN Battery Replacement When Using the Remote Control55-EN About DVDs Information56-EN Terminology Dolby DigitalDolby Pro Logic Linear PCM audio Lpcm58-EN List of Language CodesFor details, see List of Country Codes 59-EN60-EN Case of Difficulty BasicRadio CD/MP3/WMA/DVD/Video CDIndication for CD Player Indication for DVD/Video CD Player62-EN Picture is unclear or noisyIndication for SAT Receiver Mode Indication for CD Changer63-EN Sirius toIndication for iPod Mode Specifications64-EN Installation and Connections 65-ENAccessory List 66-ENSlide the mounting sleeve into the dashboard RemovalWhen mounting with Velcro fasteners Installing the Power Supply Unit67-EN Connections 68-ENAntenna Receptacle Power Antenna Lead Blue 69-EN70-EN System ExampleConnect the External Monitor 71-EN To prevent noise/interference in the audio systemLimited Warranty Page Page Page
Top Page Image Contents