Alpine DVA-9965 owner manual Using the Pro Logic II Mode, 52-EN, Selecting the Center Width

Page 54
MENU for at least 2 seconds.
• This adjustment is ineffective when the speaker is set to CENTER OFF in “Setting the Speakers” (page 46).
When the setting is complete, press and hold
6
Select the desired mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired mode.
2CH OUTPUT : 2ch output (L/R)
3CH OUTPUT : 3ch output (L/R/CENTER)
5
Select the PCM MODE by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the PCM MODE.
4
Linear PCM Setting
The output when playing discs recorded in linear PCM can be set to 2 or 3 channels.
1 Check that Defeat mode is off (page 20).
2 Press and hold MENU for at least 2 seconds.
3 Select the DVD Level mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the DVD Level mode.

Using the Pro Logic II Mode

Pro Logic processing can be conducted on the music signals recorded on two channels to achieve Dolby Pro Logic II surround sound. For two-channel Dolby Digital and DTS signals, there is also a “REAR FILL” function for outputting the signals of the front channel to the rear channel.

1Check that Defeat mode is off (page 20).

2Press and hold MENU for at least 2 seconds.

3Select the Dolby PL II mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Dolby PL II mode. The DOLBY PL II setup mode is activated.

4Select the DOLBY PL II by sliding your finger on the GlideTouch bar to the left or right, then press the GlideTouch bar.

5Select the desired mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired mode.

PL II MOVIE:

Suits the stereo TV shows and all programs encoded in Dolby Surround. It improves the sound field directivity to near that of discrete 5.1-channel sound.

PL II MUSIC:

Can be used for all stereo music recordings, and provides a wide, deep sound field.

PL II FILL:

Depending on the input signals, the sound may only be output from the front speakers. In this case, the “REAR FILL” function can be used to output signals from the rear speakers as well.

OFF: Turns DOLBY PL II function to OFF.

If PL II MUSIC is selected, the center width can be adjusted with the following operations.

This function offers the optimum vocal position by adjusting the center channel position between the centre speaker and the L/R speaker. (The adjustments established in “Adjusting the acoustic image” (page 51) are ineffective while this function is activated.)

Selecting the CENTER WIDTH CONT.

1)Select CENTER WIDTH by activating the DOLBY PL II setup mode in step 4 of “Using the Prologic II Mode.”

2)Select ON or OFF by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the ON or OFF.

If ON is set, you can enjoy the optimum vocal position by distributing the center channel sound between the center speaker and L/R speaker.

3)Adjust the level by turning the Rotary encoder.

The level can be adjusted between 0 to 7. When the level increases, the centre channel position moves from the centre speaker position to both sides.

6When the setting is complete, press and hold MENU for at least 2 seconds.

•This adjustment is effective when the setting of the centre speaker is SMALL or LARGE in the speaker setup settings.

•Avoid stopping, pausing, switching the disc, cueing, fast- forwarding or switching the audio channel of this unit while making this adjustment. The setting is cancelled if the Decode mode is switched.

•This adjustment is ineffective when the speaker is set to CENTER OFF in “Setting the Speakers” (page 46).

•This function only works with two-channel signals. This operation is ineffective when 5.1-channel DTS or Dolby Digital signals are input.

•If the REAR FILL setting is made while REAR MIX is ON, the sound for rear fill is unchanged. REAR MIX is given priority during all 2 channel decoding other than linear PCM.

•For linear PCM signals, the voice is output from the rear speaker regardless of the REAR FILL and REAR MIX setting.

•When the setting is complete, it is recommended to store the setting contents. For storing, refer to page 53.

52-EN

Page 53 Page 55
Image 54
Page 53 Page 55
Contents DVA-9965 CHA-S634 CHA-1214 CHM-S630Contents Installation and Connections Operating Instructions USE only in Cars with a 12 Volt Negative GroundNever Attempt the Following Discs playable on this unit On handling compact discs CD/CD-R/CD-RW About the GlideTouch Bar Operation Touch or press the desired position on the GlideTouch barMove your finger on the GlideTouch bar to the left or right Turning Power On and Off Initial System Start-UpLowering Volume Quickly Adjusting VolumeDisplay Tilt Adjustment Opening and Closing the Movable DisplayTuning to Preset Stations Manual Storing of Station PresetsAutomatic Memory of Station Presets Radio11-EN Frequency Search FunctionPlayback Press g or f to select the desired track fileRepeat Play Press FUNC. to activate the audio function modePress the GlideTouch bar under RPT to select the RPT mode 12-ENSearching from CD Text X. Random PlayScanning Programs File/Folder Name Search concerning MP3/ WMAAbout MP3/WMA Folder Name Search modeFile Name Search mode 14-ENTerminology 15-ENIf a menu screen appears DVD/Video CDPlaying DVD/Video CD 16-ENStopping Playback Playing Still Frames pausingStopping Playback PRE-STOP Fast-forwarding/Fast-reversingChapter/Track/Title Repeat Playback Switching the Audio TracksSwitching the Angle DVD only Video CDs with multiplex audioDisplaying the Disc Status Video CD only Switching the Subtitles subtitle language DVD onlyDisplaying the Disc Status DVD only 19-EN20-EN Sound SettingGlideTouch bar Operation FuncAdjusting and Storing the Parametric Equalizer Curve Selecting the EQ mode Factory settingsSetting Users EQ mode 21-EN22-EN Adjusting and Storing the Graphic Equalizer CurveRecalling the Stored Equalizer Curve Press and hold Menu for at least 2 seconds23-EN Way modeAbout the Crossover CrossoverAdjust the output level by turning the Rotary encoder Adjusting and Storing the Crossover SettingsPress SOURCE/POWER to adjust the slope WAY SystemExample 1. Listening Position Front Left Seat Recalling the Stored Crossover SettingsAbout Time Correction Example 2. Listening Position All SeatsPress Band to select a speaker to be adjusted Setting the Time Correction UnitAdjusting and Storing the Time Correction Display Setup menu is displayedRecalling the Stored Time Correction Settings Setting the MX Mode27-EN 28-EN Other FunctionsDisplaying the Text Press TitleDisplaying Time Blackout Mode On and OffSetting the Multicolor Illumination Rear DVD Function30-EN Personalize Data Download OperationAbout i-Personalize Data Download File name of download data shall be AU∗∗∗∗∗.MP331-EN Data DownloadingDownloading the Wallpaper Insert a CD-R/CD-RW disc containing dataSetting the language DVD SetupDVD Setup Operation Press Setup before inserting a disc, or when in stop modeSetting the Rating Level Parental Lock Setting the TV ScreenSetting the Country Code Press Return repeatedly until the Setup mode is deactivated34-EN Setting the Digital OutputSetting contents Bitstream / Lpcm Audio output/Optical digital audio output35-EN Custom SetupCustom Setup Operation ENTSetup Operation General Setting36-EN Audio Setting Display Setting37-EN Demo Setting 38-ENReceiving Channels with the SAT Radio Receiver Optional Storing Channel PresetsSAT Radio Receiver Optional Checking the SAT Radio ID NumberChanging the Display Setting the Auxiliary Data Field DisplayReceiving Stored Channels Channel/Category Search FunctionSearching by artist name Searching for a desired SongSearching by Playlist 41-ENSearching by album name Quick SearchRandom Play Shuffle M.I.X 42-ENSong will be played back repeatedly RPT mode is canceled by selecting off43-EN Each press changes the displayPlaying MP3 Files with the CD Changer Optional Changer OptionalControlling CD Changer Optional Multi-Changer Selection OptionalAdjustment Procedure for Dolby Surround 45-ENOver Adjustment Setting the SpeakersSet MX Mode of the External Audio Processor 46-EN47-EN Performing Time Correction Manually TCR/ Phase SwitchingCalculating the Time Correction = distance of farthest speaker Distance of other speakersInputting the Time Correction Graphic Equalizer AdjustmentsSwitching the Phase 48-ENSpeaker Setup Parametric Equalizer AdjustmentsSetting Bass Compressor 49-ENMixing bass sound to the rear channel Rear MIX Setting of Dolby DigitalAdjusting the speaker levels Output Level 50-EN51-EN Adjusting the DVD LevelAdjusting the acoustic image BI-PHANTOM BI-PHANTOM ON/OFFUsing the Pro Logic II Mode 52-ENSelecting the Center Width Storing Settings in the Memory Getting out the Preset Memory53-EN Remote Control Controls on Remote Control54-EN When Using the Remote Control Battery Replacement55-EN Information About DVDs56-EN Dolby Pro Logic TerminologyDolby Digital Linear PCM audio LpcmList of Language Codes 58-ENFor details, see List of Country Codes 59-EN60-EN Radio Case of DifficultyBasic CD/MP3/WMA/DVD/Video CD62-EN Indication for CD PlayerIndication for DVD/Video CD Player Picture is unclear or noisy63-EN Indication for SAT Receiver ModeIndication for CD Changer Sirius toSpecifications Indication for iPod Mode64-EN Installation and Connections 65-ENSlide the mounting sleeve into the dashboard Accessory List66-EN RemovalInstalling the Power Supply Unit When mounting with Velcro fasteners67-EN Connections 68-ENAntenna Receptacle Power Antenna Lead Blue 69-ENSystem Example 70-ENConnect the External Monitor 71-EN To prevent noise/interference in the audio systemLimited Warranty Page Page Page
Top Page Image Contents