Using the Still and Video Camera
Using the Still and Video Camera
Starting the video camera
•In Standby mode, press the left soft key twice ([Camera] → [Video]). (Or
press [Menu], highlight and press O, then press [Video] )
Tip: You can switch between the still camera and the video camera mode by pressing the left Soft key while in the video camera or still camera mode.
Video camera icons
CameraOptions
Zoom:
Zoom in Zoom out Brightness: Storage Device:
Handset SD Card Quality:
Superfine Fine Normal Image Size:
Lighting Effects: White Balance:
Cloudy Sunny
Electric Light
Fluorescent light 1 (white colour)
Fluorescent light 2 (daylight colour)
Recording voice:
indicates you can press 0 to change the size to the following.
Small size: Large size:
PAUSE: (Press O.)
END: (Press the left soft key.)
Still camera
Besides taking and sending a single photo, you can take
Taking a photo
1Slide open the phone and press the left Soft key [Camera] to access the still camera mode.
2Aim at a subject using the display as a viewfinder. If you press [Camera] when the phone is closed, only the front camera is usable.
3Press O to take a photo. A preview is displayed before saving.
•To retake another and disregard the current photo, press B and press [Yes] corresponding to the confirmation dialogue. The display returns to the viewfinder in the camera mode.
4Press O to save the photo or wait for a while and the photo is automatically saved.
•To view the photo you have saved, go to the Picture Album from [Options].
•The photo may not be stored depending on the size of the data and the remaining memory. It is recommended that you delete any unneeded data in the Picture Album before taking a photo.
38 | 39 |