Settings
Settings
Setting vibration to confirm the connection
This function enables the phone to vibrate when the other party’s phone has detected your call. It is set to OFF by default.
1Open the Vibrate on Connection display.
•Press [Menu] → → Phone Settings → Vibrate on Connec-
tion
2Select ON and press O.
Setting the melody played until your video call is connected
This function enables you to listen to a melody instead of a ringing tone until the other party answers your video call.
1Open the Video Call Tone display.
•Press [Menu] → → Phone Settings → Video Call Tone
2Select ON and press O to activate the function. Two menu items appear with icons. Press [Set] after you finish completing the settings below.
(Melody): Selects a sound or melody pattern for a Video Call Tone either from the preset (Original) patterns or by searching through the Media Album.
(Volume): Adjusts the volume for the Video Call Tone.
Setting Auto Power ON/OFF
You can set your phone to be turned on or off automatically at a set time.
Caution: Please make sure that Auto Power ON is deactivated before boarding an aircraft.
1Open the Auto Power ON/OFF display.
•Press [Menu] → → Phone Settings → Auto Power ON/OFF
2Select Auto Power ON or Auto Power OFF and press O.
3Select ON and press O, and then enter the time to turn on or off.
4Press [Set] or O after you finish the setting.
Answering or ending a call with a sliding motion (Slide Activation)
This function enables you to answer a call by sliding the phone open or end a call by sliding the phone closed.
1Open the Slide Activation display.
•Press [Menu] → → Phone Settings → Slide Activation
2Select Open to Talk or Close to End and press O.
3Select ON and press O.
•To release the setting, select OFF at this point.
Browser settings
1Open the Browser Settings display.
•Press [Menu] → → Browser Settings
2Select from the following items and press O.
120 | 121 |