Basic Operations
Basic Operations
Using a wired hands free headset while
You can perform the functions below by pressing and holding the earphone switch.
•Receives a call when an incoming call is detected.
•Makes a call in the standby mode.
•Cancels a call in the middle of making a call.
•Ends a call.
•Resumes a call after putting the other party on hold.
•Resumes a call with the second party after putting him or her on hold and talking with the third party or switches between the second party and the third party to talk with.
Note: Operation of the earphone switch depends on the type of headset.
Using the Penlight
You can use the LED as a penlight if you need to illuminate an object in the dark.
Switching ON the penlight
1Slide the phone open.
2In Standby mode, press and hold v.
Locking or Unlocking the
Phone
To prevent accidentally pressing keys/buttons
1From your Standby display, press and hold [Menu].
2To unlock, press and hold [Unlock].
Note: Phone must be closed to activate the lock. To prevent unauthorised use, see. P 124 on how to configure dial lock.
Pause Dialling
When using a
Entering a phone number including pauses
Press n twice after entering each set of numbers. The character “P” is inserted.
Calling a number with pauses
Example: If the number “P1234P5555” is to be added after the phone number.
1Make the call.
2Press t. The first series of numbers (1234) is sent.
3Press t. The second series of numbers (5555) is sent.
Changing the display
language
1In Standby mode, press [Menu],
highlight and press O, then select Phone Settings and press
O.
2Select Language and press O, then select Display Language and press O.
3Select the language you want to use from English, Français, Deutsch, and Italiano.
14 | 15 |