Basic Operations
Basic Operations
Text entry
This phone uses three modes for text and character input, Standard, T9 (Predictive), and Numeric. The Standard and T9 modes are used for entering text, and the Numeric mode is used for entering numbers. The language indicator at the bottom left of the display shows the language you are currently using, except in the numeric input mode. For key assignment, see the table on p. 23.
Changing the input language
It is possible to enter text in another language without changing the current language mode setting default. E.g., to enter a French word in English mode. Press [Options] in the text input mode, select Input Language, select the desired language, and then press O.
Changing the font size
•Press [Options] in text input mode, select Character Size and press O, select the desired font size and press O.
Changing the input mode
•Press and hold ;. In T9 mode, 
appears at the centre bottom of the
display. In the numeric input mode, 
appears.
Tip: You can also change the input mode by pressing [Options] and selecting Input Method or Numeric Input in text input mode.
First Name
0/32
OK Options
First Name
0/32
OK Options
First Name
Standard text input mode
Press and hold
;.
T9 input mode
Press and hold
;.
Changing between upper case and lower case
•Press ; in either T9 mode or Standard text input mode. The case
status indicator at the left bottom of
the display, (
, 
, or 
) shows the characters you are
currently using.
: Makes all the letters
: Capitalises the first letter of each sentence and makes the rest
: Capitalises all the letters.
Note: If 
is not shown, but either 
, or 
appears, it indicates that the Standard text input mode is used.
0/32 Numeric input mode
OK Options
16 | 17 |