Connectivity
Connectivity
step 6 of “Sending data via Bluetooth from the Media Album.” see p. 169.)
Receiving data
You must switch the Bluetooth mode on to receive data from another device.
•To switch the Bluetooth mode on, press and hold O. Make sure appears in the phone’s display. Save
the data when the transmission is finished.
Exchanging Owner Information
You can send and receive Owner Information data between your phone and another PC, PDA or mobile phone. The following example indicates an exchange between your S750i and a PC. The initiator is your S750i.
You must activate Bluetooth mode on your PC before performing the following.
Note: While your S750i is in Bluetooth mode and the other device has been registered in your Connection List, your Owner Information will be automatically sent if requested by a registered device.
Your S750i
1Press O → Bluetooth → Exchange Owner Info
2Press [Search].
3Select the PC device and press O.
4Once prompted to save to the Connection List, press [Yes].
5Enter a Bluetooth Password (Must match the PC you are connecting with) and press O if you have not already saved it in the Connection List.
Refer to steps 1 and 2 below for PC side operations.
6Select Save and press O to save the data received from the PC on your S750i.
PC (Bluetooth enabled)
1On the PC's display, enter your Bluetooth Password (Must match the S750i you are connecting with) after the authentication prompt for connection with your S750i appears.
2Select the owner information and begin the exchange.
Note: Refer to your PC's user guide for details on Bluetooth operations.
Regarding other generic Bluetooth devices such as mobile phones:
•You may be required to save your S750i in the connection list on the other device. Enter the Bluetooth Password if prompted.
•The timing of being prompted to save your S750i in the connection list and save the owner information on the other device may be different depending on the device.
•For smooth operation you may need to respond quickly to another device's Bluetooth Password prompt as the Bluetooth timeout of that device may
occur quickly.
•Do not press any keys while data is being exchanged or disconnection of transmission may occur.
Using the Bluetooth headset
The Bluetooth headset can be wirelessly connected to the phone, and allows you to make and receive a call handsfree. Read your Bluetooth headset user manual before using. For additional information, download and view the Bluetooth Headset Guide from the ‘Service’ → ‘Downloads’ section at http://www.sanyo- mobile.com.
Configure both devices
1Activate the Bluetooth pairing mode on the Bluetooth headset.
2On your S750i, press O → Bluetooth → Connect to Hands-
free
3Press [Search].
172 | 173 |