Sanyo SCP-4920 manual Accessing the Security Menu, Locking Your Phone, Setting Key Guard

Setting Key Guard

This feature can only be activated when your phone is in standby mode.

To activate Key Guard:

Press and hold .

– or –

1.Press to access the main menu.

2.Highlight Key Guard and press .

To deactivate Key Guard:

Press and hold .

Tip: You can only dial Emergency numbers while Key Guard is set.

Setting Up Key Press Echo

With this feature, your phone echoes the number when you press the keypad. This feature is available when you are in standby mode.

1.Press to access the main menu.

2.Highlight Settings and press .

3.Highlight Sounds and press .

4.Highlight Others and press .

5.Highlight Key Press Echo and press .

6.Select On and press .

3. Security

Accessing the Security Menu

You must enter your lock code to view the Security menu.

1.Press to access the main menu.

2.Highlight Settings and press .

3.Highlight Security and press .

4.Enter your lock code.

Tip: If you can’t recall your lock code, try using the last four digits of your phone number or 0000.

Locking Your Phone

When your phone is locked, you can only receive incoming calls or make calls to 911, Customer Service, or special numbers.

1.From the Security Menu display (See “Accessing the Security Menu” above), highlight Lock Phone and press .

2.Highlight Lock Now or On Power-upand press .

3.Depending on your preference, highlight either Full Lock or

Excp. Incom.Calls and press .

Full Lock: All phone calls except for emergency number,

(Customer Service) or special numbers cannot be made. No phone calls can be received except for special numbers.

Excp. Incom.Calls: All phone calls except for emergency

number, (Customer Service) or special numbers cannot be made, but all incoming calls can be received.

Tip: If you want to cancel the “On Power-up” setting before turning the phone off, select Unlocked during step 2 above.

42 43