Sanyo SCP-4920 manual Saving a 10-4 Number, Adding a New Contact to Your Personal List

Saving a 10-4 Number

You can save a 10-4 number from the ending display to your Personal List/Personal Groups.

Adding a New Contact to Your Personal List

You can store the total of 200 entries in the Personal List/ Personal Groups.

1.From the ending display, press

2.Enter a name and press .

3.Press Save (left softkey).

4.Press Yes (left softkey).

Save

(right softkey).

1.Press 10-4(right softkey) or press to access the 10-4 List.

2.Press Go to (left softkey), highlight Personal List, and press .

3.Highlight <Add Contact> and press .

– or –

Tip: If the entry already has a name, skip step 2 and 3 above.

Note: If the number is already stored in the Personal List/Personal Groups, the “Save” softkey does not appear.

Finding an Entry in the 10-4 List

You can find your desired entry by entering a few letters.

1.Press 10-4(right softkey) or press to access the 10-4 List.

2.Press Go to (left softkey), highlight your desired list (Company List, Company Groups, Personal List, or Personal Groups), and press .

3.Enter the first letter or the first few letters of the name.

The display shows the list beginning with the letter(s) you entered.

4.Scroll through the list and press to select your desired entry.

Highlight an entry and press Options (right softkey). Then highlight Add Contact and press .

If the Personal List is full, you will see a warning message on the display.

4.Enter a name for the new contact and press . (This is the name you will see when calling or receiving a call from the

contact.)

5.Highlight the 10-4 Number field, enter the contact’s 10-digit 10-4 number (their Phone number) and press .

6.Press Save (left softkey) to save the new contact to your Personal List.

Tip: You are not allowed to use the following symbols during step 4:

: , @ , ; , / , * , ) , and (.

100 101