Kathrein CAP 700 manual Dismantling for Servicing, Esc, Address of the Service Centre

Page 25

DISMANTLING FOR SERVICING

If repairs to the system or individual components are necessary, contact your specialist dealer or our service centre (see below for address).

Never open the turntable yourself!

DISMANTLING

Do not cut the cables! At the cable junction provided, disconnect the cables projecting from the turntable from the two cables laid within the interior of the vehicle (unplug the plug).

The cables laid within the vehicle can remain there

Unscrew the six M6 screws securing the turntable to the mounting plate

Place two wooden supports on the vehicle roof, for protection

Then place the turntable on the prepared wooden supports

To ship the turntable, use the original packaging which you have saved

Seal the opening in the vehicle roof appropriately to protect against the ingress of moisture

If a HDZ 100 roof gland has been fitted and the equipment is then removed, the cable channels no longer used should be sealed with the integral plugs. The enclosure is then watertight once again.

Note: Before exchanging the UFS 740sw, first move the turntable to the park position.

ADDRESS OF THE SERVICE CENTRE

ESC

Electronic Service Chiemgau GmbH

Bahnhofstraße 108

83224 Grassau, Germany

Phone:

+49

8641 9545-0

Fax:

+49

8641 9545-35 and -36

Internet: http://www.esc-kathrein.de

e-Mail: service@esc-kathrein.de

25

Image 25
Contents CAP Contents Disposal Instructions Foreign Language Installation MANUALS/DISPOSALSpent batteries are special waste Product Package Mobiset 3 CAP 700 COMPONENTS/SCOPE of DeliveryProper USE USE for the Intended Purpose Proper USEEssential information Safety Instructions Important NotesAdhesive sealant Road Traffic Licensing Regulations StVZO Power supply, fusingChecks before commencing a journey Selecting the Installation Location Installation and ConnectionRequired Tools and Equipment Unpacking and PreparationDirection of travel Ring Adhesive Installation StepsArrow in the direction of travel Recess for cable Adhesive areas between the two grooves Installation of Turntable Direction of travel Version with External Cable Gland FIG. F Brief Instructions for Installing the Turntable Tightening torque 6 Nm Suspended Installation Installation on a Fixed Flat Surface They must not be reversed or the unit will not function Installation and Connection Connection Example for 12 V Battery Connection Reception RANGE/FOOTPRINT Dismantling for Servicing Address of the Service CentreESC DismantlingPolarisation Setting Polarisation SettingAstra Eutelsat Setting Operations Safety NotesView after installation +45 Manual Lowering to Park Position Manual Lowering Dimensions MM Technical DataTechnical Data Type CAP Materials/preparation and company designation Sikaflex 291 Safety Data SheetComposition/data on components Potential hazardsMeasures if inadvertently released Measures for fire fightingHandling and storage Exposure limitation and personal protective equipmentStability and reactivity Physical and chemical characteristicsEcological data Toxicology data SensitisationDisposal instructions Transport dataOther data Sikaflex-291 Ikaflex Sikaflex 291 Technical Data SheetChemical Stability CAP 700 Operating Manual Remote Control Important Information for CAP 700 Before SetupFirst Installation Page Picture format TV aspect ratioTV Scart Output SystemLocal time offset Alignment Satellite Search Moving the Antenna Manually Channel Selection from the Channel List Channel Satellite SelectionTimer Programming Change of LOCATION/TIMER ProgrammingMoving towards Resetting the Turn Table Antenna RESET/PARKINGParking the Turntable System Protection Messages Special Messages from the TurntableSpecial Messages from the Turntable Messages Arising from Software Problems Further Messages Declaration of Conformity For Your Notes 936.3417/-/0908/ZWT Technical data subject to change
Related manuals
Manual 1 pages 14.04 Kb