Kathrein CAP 700 manual Polarisation Setting

POLARISATION SETTING

POLARISATION SETTING

The LNB for the CAP 700 is factory-set to the polarisation setting “0”. In this position

you can still receive signals	from	satellites with differences (between the longitude
of the desired reception area	and	the orbit position of the satellite) of 15° to 20°.

For differences greater than this it is best to rotate the LNB and set the necessary polarisation angle.

However, we expressly draw attention to the fact that positioning the LNB at a deviation of up to +45° or up to -45° from the centre position makes sense only if a satellite to the far West or the far East is actually preferred for reception.

The respective setting angle required for the polarisation can be found in the following table.

WestEast

Longitude for the reception position

26