RESET/PARKING
PARKING THE TURNTABLE
You have three options for “parking” the antenna.
1.The antenna can be moved to park position by pressing the button twice.
2.Press the button to return to the main menu. The buttons and button allow you to call up the submenus (“Settings”, “Antenna Configuration”). Use the buttons to navigate to the
3.When the ignition is operated, the antenna automatically moves to the park position! However, for this to happen the green wire of the power supply cable must be connected to the ignition and the turntable connected to the power supply (see “Connection Diagram”). Refer to the detailed instructions for this in the CAP unit installation manual.
The antenna is moved to park position, and this is then confirmed.
The Antenna Configuration menu allows you to check whether the antenna truly is in the park position.
53