Kathrein CAP 700 manual Manual Lowering to Park Position

Page 30

MANUAL LOWERING TO PARK POSITION

If a defect arises in the electronic controls, after some disassembly work the satellite dish can be returned to the park position (horizontal position) manually. Following this however recalibration by an authorised workshop is always necessary.

Driving to the nearest workshop with the antenna extended at a moderate speed and taking into account the increase (+ 79 cm) in the vehicle height is an option and is preferable to manual lowering!

Users unfamiliar with the necessary repair work are urged not to attempt to lower the antenna manually into park position themselves. They should contact a technician or engineer. They may find a suitable person on the campsite.

In any case, the safety instructions listed below must be followed.

SAFETY NOTES

Make sure that:

-The antenna and connected units are disconnected from the power

-The person carrying out the repairs does not suffer from vertigo and can move around safely on the roof of the caravan or motor home

-The person carrying out the repairs is wearing sturdy and non-slip shoes

-The person carrying out the repairs has a secure position to stand and hold on while working

-The roof and the climbing equipment used (e.g. ladder) are dry, clean and non-slip

- The roof can withstand the weight of the person carrying out the repairs

Attention! Risk of death or injury due to falling or roof collapsing!

-Do not hold onto the antenna, as the rocker comes free without warning during dismantling

Attention! Risk of death and injury due to falling or crushing!

-Nobody should be inside the caravan/motor home underneath the antenna during dismantling/installation

Attention! Risk of death or injury due to possible roof collapsing and falling parts!

30

Image 30
Contents CAP Contents Foreign Language Installation MANUALS/DISPOSAL Disposal InstructionsSpent batteries are special waste Mobiset 3 CAP 700 COMPONENTS/SCOPE of Delivery Product PackageProper USE Proper USE USE for the Intended PurposeSafety Instructions Important Notes Essential informationAdhesive sealant Power supply, fusing Road Traffic Licensing Regulations StVZOChecks before commencing a journey Required Tools and Equipment Installation and ConnectionSelecting the Installation Location Unpacking and PreparationDirection of travel Installation Steps Ring AdhesiveArrow in the direction of travel Recess for cable Adhesive areas between the two grooves Installation of Turntable Direction of travel Version with External Cable Gland FIG. F Brief Instructions for Installing the Turntable Tightening torque 6 Nm Suspended Installation Installation on a Fixed Flat Surface They must not be reversed or the unit will not function Installation and Connection Connection Example for 12 V Battery Connection Reception RANGE/FOOTPRINT ESC Address of the Service CentreDismantling for Servicing DismantlingPolarisation Setting Polarisation SettingAstra Eutelsat Safety Notes Setting OperationsView after installation +45 Manual Lowering to Park Position Manual Lowering Technical Data Dimensions MMTechnical Data Type CAP Composition/data on components Sikaflex 291 Safety Data SheetMaterials/preparation and company designation Potential hazardsHandling and storage Measures for fire fightingMeasures if inadvertently released Exposure limitation and personal protective equipmentPhysical and chemical characteristics Stability and reactivityDisposal instructions Toxicology data SensitisationEcological data Transport dataOther data Sikaflex 291 Technical Data Sheet Sikaflex-291 IkaflexChemical Stability CAP 700 Operating Manual Important Information for CAP 700 Before Setup Remote ControlFirst Installation Page TV Scart Output TV aspect ratioPicture format SystemLocal time offset Alignment Satellite Search Moving the Antenna Manually Channel Satellite Selection Channel Selection from the Channel ListChange of LOCATION/TIMER Programming Timer ProgrammingMoving towards RESET/PARKING Resetting the Turn Table AntennaParking the Turntable Special Messages from the Turntable System Protection MessagesSpecial Messages from the Turntable Messages Arising from Software Problems Further Messages Declaration of Conformity For Your Notes 936.3417/-/0908/ZWT Technical data subject to change
Related manuals
Manual 1 pages 14.04 Kb