Kathrein CAP 700 manual Moving the Antenna Manually

MOVING THE ANTENNA MANUALLY

Press the  button to return to the main menu. The  buttons and  button allow you to call up the submenus (“Settings”, “Antenna Configuration”).

You can correct the inclination and horizontal angle of the antenna using the “Elevation” and “Azimuth” settings. To do this press the  buttons or enter a numeric value using the numeric keys and

confirm with the  button. Check your settings by referring to the “Signal-Strength” and “Signal- Quality” bars on the right-hand side. The higher the bar, the stronger and better quality the signal received.

The new co-ordinates are not assigned to the satellite until you have saved the satellite position when exiting the “Antenna Configuration” menu!

When you have performed the correction, press the  button to exit the menu. You will be asked whether you wish to save the changes.

Press one of the  buttons (“Yes, save changes” or “No, don’t save changes”) and confirm by pressing the  button.

49