Siemens 4110 operating instructions Prerequisite, Gap

Registering and de-registering handsets

Step

by

step

Manual registration

Gigaset 4000Comfort/Micro handsets on a Gigaset 4110isdnbase

If a handset is already registered on another base, you must now specifically register it on your own base.

1.Press *for selection menus.

2.Select using [ ] and [OK ]: Settings → Register H/Set.

3.Select using [è] and [OK ]: Base 1 - Base 4.

4.Key in the system PIN and confirm with [OK ] (factory setting: 0000) – Regstr.Procedure Base 1 will be displayed, for example.

5.Long-press the key on the underside of the base.You can confirm the internal number you are offered with [OK ], or select another internal number with [è] and confirm it with [OK ].

In the event of full occupancy, please de-register a registered handset

first.

After successful registration the handset will return to the idle condition. The internal number will appear on the display (example: “Internal 11”).

Registering Gigaset 2000/3000 handsets and other manufacturers’ handsets on the Gigaset 4110isdn base

Prerequisite:

Other manufacturers’ handsets must support the GAP standard.

Not all the functions of your handset may be available despite this.

GAP	Generic Access Profile =
	Standard for interoperation between handsets and bases of other
	manufacturers

Info Your Siemens handsets and bases support the GAP profile. On page 96 you will find a compatibility table for using simple or older handsets on your base.

1.Register your handset according to the relevant handset’s operating instruc- tions.

2.Press the key on the underside of the base for longer than 1 second.

After registration, your Siemens base will assign the handset the first free in- ternal call number.

18