Siemens 4110 Emergency numbers, Set up new emergency number, Dialling the emergency number

Page 81

Security settings

Step

by

step

Emergency numbers

Two or three emergency numbers (country-specific) have been entered in the base station. Five additional emergency numbers can be entered on the follow- ing list items.

Set up new emergency number

1.Press *for selection menus.

2.Select using [ ] and [OK ]: Base Settings Settings Security.

3.Select using [ ] and [OK ]: Emergency nos. <no entry>.

4.[)] confirm.

5.Select using [ ] and [OK ]: Change number.

You can also delete or display an emergency number in this additional menu.

6.Enter a new emergency number (max. 32 digits) and [)] confirm.

7.Select using [è] and [OK ]: Save entry.

In this additional menu you can also transfer a number from the telephone book or a provider’s number (if supported) as an emergency number.

Info If your Gigaset 4110/4115isdn is connected to a PBX, you will need to prefix the emergency number with the applicable access code (“0” for example). This also applies to the permanently entered numbers “110 and “112”, which you will have to replace with, for instance, “0110” and “0112”.

Dialling the emergency number

Info The emergency number can also be dialled on a handset with a restricted class- of-service (such as Internal only).

1.Press any key or ￿.

2.Confirm [EMERG.].

3.Enter emergency number.

80

Image 81
Contents Be inspired Only use approved rechargeable batteries of the same type Safety precautionsBrief overview of the handset Relationship between control key and softkeysSoftkeys Control key Navigating the menus to set the hands-free volume Display symbolsSymbolMeaning Functions of the control keySet the alarm clock Calendar/Clock Quick reference guideHandset Contents Getting into the Isdn world is easy Contents Using several handsets Charge and call duration display Operation with Gigaset repeater Many thanks Dear customerInfo Power failure Setting up the basePutting the telephone into operation Product packageConnecting the base Insert the batteries Putting the handset into operationPlace the handset in the base and charge the batteries Please remove the protective foilAttaching the belt clip Activating/deactivating the handsetActivating/deactivating the key lock Setting and operating the base station Operating the 4000 Classic handsetDescription 4000 3000/2000 Registering and de-registering handsets GAP PrerequisiteRegistering a Gigaset repeater De-registering devicesChanging the base Set date and time Time functionsActivate the alarm Setting the alarmDe-activate the alarm Telephone is in the idle conditionSetting an appointment Switch off the alarmSwitching off appointment signalling AppointmentsThen select Missed Appoint Activating the appointment functionConfiguring Gigaset 4110isdn and MSNs What is an MSN?Possible internal users are Usage Receive Calls Ans Transmit MSN nextRing delay per incoming MSN Installation Assistant Starting the Installation AssistantEntering the date and time Setting incoming MSNs Finding your own numbers MSNsEnter own numbers MSNs and name for the MSNs Operation using a telephone system Setting outgoing MSNsSet up call number MSN Setting up Isdn call numbers MSNAssigning call numbers MSNs Assigning an incoming MSNAssigning an outgoing MSN Select using Z and OK Send MSN → required MSNSystem settings Changing the names for internal subscribersCall waiting activating/deactivating CW Setting external/internal enquiry call Busy signal when MSN is engaged Busy on BusyConfiguring music-on-hold Configuring reject for the entire MSN groupThis setting enables you to change the type of melody Audio settingsChanging long-distance codes Assigning a ringer melody to an MSNQuerying the status Restoring the factory settingHandset and loudspeaker volume Changing the volumes, melodies and tonesSet handset individually Changing a handset’s display languageTime control for ringer volume ring tone Ringer volume and melodyActivate/deactivate advisory tones Alerting toneTo deactivate the alerting tone TonesActivate/deactivate automatic call answering Restore the handset to the factory settingsConvenient telephoning External callingInternal calling Display the caller’s number Clip Answering a callHands-free talking Hands-free talking when diallingMuting the microphone Hands-free talking while a call is in progressNumber redial Manual number redialAutomatic redial To store an entry Telephone directory/Provider list10x 11x 12x 13x 14x Table of symbolsDialling using the provider list Dialling using the telephone directoryProvider list call-by-call Storing, changing, deleting provider list entriesTo use the speed dialling number Store provider number call-by-call for speed diallingDisplay memory space Deleting a single entryCollective call/Group call Configuring internal collective call groupsEnter birthdays/anniversary dates Starting a collective call to all internal subscribersSetting ring delay Ring delayPicking up calls during ring delay Conducting calls with more than one subscriberToggle Setting up an external enquiry callConference circuit Ending an external enquiry callEntering numbers in the telephone directory Rejecting callsRejecting calls Dialling from the Calls List using the Message key Missed calls listDialling from the Caller List list via the menus Copying numbers from the Caller List list to the directory External call forwarding CF Internal call forwardingTransferring incoming calls CD Call Deflection Switching internal/external call forwardingActivating callback Automatic external callbackAccepting a callback Deleting a callbackHolding calls Call Hold Call waiting CWAccepting/rejecting external call waiting Putting external subscribers on holdReserving a line Calling line identification restriction ClirAutomatic call forwarding due to inaccessible handset Set MSN for next callSeize specific MSNs Cancel CallPark after answering a call Tracing switchParking/continuing calls unpark During or immediately after the callTransferring telephone directory entries Using several handsetsSending an entry to another handset Send directory or provider listRoom monitor Signalled without a ring toneReceive directory or provider list An internal call numberStoring an internal call number for the room monitor Storing an external call number for the room monitor Night service Walk and Talk modeActivating walk and talk mode on the handset Using walk and talk modeActivating/deactivating night service Entering an automatic start/end time for night serviceEntering an external destination call number Entering an internal destination call numberSetting up Costs cent.off Configuring determination of costsSetting up Units cent.off Charge and call duration displayDisplay last call costs Displaying a cost overviewEntering the price per unit Deleting the cost overview totalShort messages SMS Administering SMS service centresPrerequisites Sending SMS messagesEntering, changing or deleting call numbers of SMS centres Activating/deactivating the SMS transmit centreWriting, saving and sending SMS messages Registering/de-registering with the SMS centreProducing an SMS message Saving an SMS message without sending itInfo Input+functions Sending an SMS message without saving it Interrogating available memory spaceReading and deleting received SMS messages Inbox listDisplay receive MSN who is the SMS message for? DirectorySMS message from? Dial the call number of the SMS messageOutbox list Options when reading an SMS messageReading and deleting stored SMS messages Errors while an SMS message is being transmitted Other SMS featuresOptions when reading a stored SMS message SMS on PBXsSecurity settings Specifying the class-of-serviceChange system PIN Set up new emergency number Emergency numbersDialling the emergency number Prefixes access codes Operation using a telephone systemEntering a prefix access code Call transfer ECT Explicit Call TransferDialling options External enquiry callEnd external enquiry call Activating automatic keypad switching Setting optionsActivating standard dialling Isdn Activating * and # diallingActivate the keypad for the next call only Special requirements5th step 4th stepOperation with Gigaset repeater Activate/deactivate repeater capabilityRegistering a repeater Questions and answers AppendixContact with liquid Forwarding condi No calls are beingFor call forwarding For PABXsSo bus does not ring Question Possible cause Possible solution Handset does notScope GuaranteeGuarantee period Service Excerpt from the original declaration Recommended batteries Power consumptionHandset operating/charging times Nickel-Cadmium NiCd Nickel-Metal Hydride NiMHFeature Status General technical dataFunction Gigaset Other Classic Manuf CompatibilityAccessories Gigaset 4000 Micro handsetGigaset 4000 Comfort handset Gigaset 4000 Classic* handset Gigaset repeaterNot available in all countries Menu displays Gigaset 4000 Comfort menuStep Base Settings Missed calls Base Settings StatusBase Settings Call preparat Menu of the Gigaset 4110isdn base stationBase Settings Forward. base Base Settings Forward. netwBase Settings Night service Base Settings Settings SecurityBase Settings Settings Setup user Base Settings Settings System settings Base Settings Settings Service centres Base Settings Settings Isdn settingsIsdn Glossary Call forwarding Call deflectionCall waiting Callback on busyChannel Calling Line Identification Restriction ClirCharge display Conference callElectronic code lock Digital exchangeEn-bloc dialling Enhanced lineInternal ringer Internal callsIsdn abbreviations KeypadOpen listening On-hook diallingOutgoing MSN freely selectable Parking callsRing delay Remote power-onRecording the calls Reject call waitingIndex of keywords Receive Send entry Emergency number SMS A3 1 0 0 8 G4 1 1 0 B1 0 2 2 7 6 1