Charge and call duration display
Step
by
step
Entering the price per unit
Before the charges for each call can be calculated, the currency and price per unit must be defined (the default setting is No rate). For determining the costs, Units cent.off. must be set (default).
1.Press *for the selection menus.
2.Select using [ ] and [OK ]: Costs.
3.Select using [ ] and [OK ]: Type of calcul.
4.Select using [ ] and [OK ]: Rate
5.Enter the basic price and confirm with [].
6.Select using [ ] and [OK ]: Save entry.
If you would like to set an additional currency:
7.Enter the currency and confirm [].
8.Select using [Z] and [OK ]: Save entry.
If No rate was already set a prompt is displayed.
9.Confirm the prompt for accounting method with [YES]. All accounts are reset and the option is highlighted.
Displaying a cost overview
Depending on the setting, call or charge units are displayed for each internal subscriber, for each configured MSN, and for the system as a whole.
1.Press *for the selection menus.
2.Select using [ ] and [OK ]: Costs.
3.Select using [Z] and [OK ]: Cost overview.
The accounts for each internal subscriber and for each configured MSN are dis- played. The total amount is shown at the start of the list.
Deleting the cost overview total
You are in the cost overview display:
1.Select using [ ] and []: (required cost overview).
2.Select using [Z] and [OK ]: Delete amount.
Info Totalled and individual costs must be deleted separately. This means that if you delete an MSN total for example, the individual charges incurred remain stored in the handset and must be deleted individually.
Display last call costs
The total costs and the costs for the last call made on this handset can be dis- *played when the "talk" key is pressed.
1.is pressed for the menu.
2.Press [Z] and [OK ] to select: Costs → Last charge ('before menu item = ON / none = OFF)
3.Press C.
68