Siemens 4110 Toggle, Conference circuit, Setting up an external enquiry call

Convenient telephoning

Step

by

step

1.	To switch between called parties, select(1st and 'or [è] and [ê].
	Toggle
	By toggling, you switch from the active	call) to the inactive (2nd call)

connection. The first call remains connected.

Ending an enquiry call/toggle

1.Press *for the menu.

2.Select using [ê] and [OK ]: End.

You are reconnected with the subscriber on hold.

Conference circuit

A conference circuit enables you to talk to two parties at the same time. These can either comprise two external subscribers, or one external and one internal subscriber.

Setting up three-way calling

You are conducting an enquiry call. The first subscriber is put on hold.

1.Press [CONF.]: This establishes the conference circuit.

Ending three-way calling

You are conducting three-way calling.

1.Press [INDIV.]: The conference call is terminated. The connection which was active immediately before three-way calling was set up is re-established as the active connection. The other subscriber is put on hold once more.

Setting up an external enquiry call

You would like to call an internal subscriber during an external call; To set, see:

1.Press *for the menu.

2.Select using [ê] and [OK ]: Enquiry call.

3.Enter the call number for the second subscriber.

Ending an external enquiry call

You are conducting an enquiry call which you would like to end:

1.Press *for the menu.

2.Select using [ê] and [OK ]: End.

Transferring calls on/before answer – ECT (Explicit Call Transfer)

ECT is currently only supported behind PABXs. To activate/deactivate call transfer, see page 83.

You are conducting an external call which you would like to transfer to another external subscriber.

1.Press *for the menu.

2.Select using [ê] and [OK ]: Enquiry call.

3.Enter the call number to which the call is to be transferred.

	4.	Replace the handset: press	.
or		Conduct the enquiry call.
	4.
		Replace the handset: press +.
	5.

50