Siemens 4110 Operation with Gigaset repeater, Activate/deactivate repeater capability

Page 87

Operation with Gigaset repeater

Step

by

step

Operation with Gigaset repeater

You can use the Gigaset repeater to increase the range of your handsets. Your Gigaset 4110isdn is prepared for use of a Gigaset repeater (accessory).

Activate/deactivate repeater capability

Use this function to activate or deactivate repeater capability.

1.Press *for selection menus.

2.Select using [è] and [OK ]: Base Settings → Settings → System settings → Spec. function → Repeater.

3.Set with [OK ] ('in front of the menu item = ON / without = OFF)

4.Press the [NEXT] key to accept, the handset will briefly stop operating.

Registering a repeater

1.The Gigaset repeater is switched off (unplugged from mains).

2.Press the registration key on the base station.

Info Make sure there are no other base stations near the Gigaset repeater in the registration state when doing this.

3.Connect the Gigaset repeater to the mains.

4.An LED on the Gigaset repeater will flash continuously. This diode will soon be permanently lit, indicating completion of the registration process and the ready- to-operate condition.

More detailed information can be found in the Gigaset repeater’s operating in- structions.

86

Image 87

Contents Be inspired Only use approved rechargeable batteries of the same type Safety precautionsBrief overview of the handset Relationship between control key and softkeysSoftkeys Control key Functions of the control key Display symbolsNavigating the menus to set the hands-free volume SymbolMeaningSet the alarm clock Calendar/Clock Quick reference guideHandset Contents Getting into the Isdn world is easy Contents Using several handsets Charge and call duration display Operation with Gigaset repeater Many thanks Dear customerProduct package Setting up the baseInfo Power failure Putting the telephone into operationConnecting the base Please remove the protective foil Putting the handset into operationInsert the batteries Place the handset in the base and charge the batteriesAttaching the belt clip Activating/deactivating the handsetActivating/deactivating the key lock Setting and operating the base station Operating the 4000 Classic handsetDescription 4000 3000/2000 Registering and de-registering handsets GAP PrerequisiteRegistering a Gigaset repeater De-registering devicesChanging the base Set date and time Time functionsTelephone is in the idle condition Setting the alarmActivate the alarm De-activate the alarmAppointments Switch off the alarmSetting an appointment Switching off appointment signallingThen select Missed Appoint Activating the appointment functionUsage Receive Calls Ans Transmit MSN next What is an MSN?Configuring Gigaset 4110isdn and MSNs Possible internal users areRing delay per incoming MSN Installation Assistant Starting the Installation AssistantEntering the date and time Setting incoming MSNs Finding your own numbers MSNsEnter own numbers MSNs and name for the MSNs Operation using a telephone system Setting outgoing MSNsAssigning an incoming MSN Setting up Isdn call numbers MSNSet up call number MSN Assigning call numbers MSNsAssigning an outgoing MSN Select using Z and OK Send MSN → required MSNSystem settings Changing the names for internal subscribersCall waiting activating/deactivating CW Configuring reject for the entire MSN group Busy signal when MSN is engaged Busy on BusySetting external/internal enquiry call Configuring music-on-holdAssigning a ringer melody to an MSN Audio settingsThis setting enables you to change the type of melody Changing long-distance codesQuerying the status Restoring the factory settingChanging a handset’s display language Changing the volumes, melodies and tonesHandset and loudspeaker volume Set handset individuallyTime control for ringer volume ring tone Ringer volume and melodyTones Alerting toneActivate/deactivate advisory tones To deactivate the alerting toneActivate/deactivate automatic call answering Restore the handset to the factory settingsConvenient telephoning External callingInternal calling Display the caller’s number Clip Answering a callHands-free talking while a call is in progress Hands-free talking when diallingHands-free talking Muting the microphoneNumber redial Manual number redialAutomatic redial To store an entry Telephone directory/Provider list10x 11x 12x 13x 14x Table of symbolsStoring, changing, deleting provider list entries Dialling using the telephone directoryDialling using the provider list Provider list call-by-callTo use the speed dialling number Store provider number call-by-call for speed diallingDisplay memory space Deleting a single entryStarting a collective call to all internal subscribers Configuring internal collective call groupsCollective call/Group call Enter birthdays/anniversary datesConducting calls with more than one subscriber Ring delaySetting ring delay Picking up calls during ring delayEnding an external enquiry call Setting up an external enquiry callToggle Conference circuitEntering numbers in the telephone directory Rejecting callsRejecting calls Dialling from the Calls List using the Message key Missed calls listDialling from the Caller List list via the menus Copying numbers from the Caller List list to the directory External call forwarding CF Internal call forwardingTransferring incoming calls CD Call Deflection Switching internal/external call forwardingDeleting a callback Automatic external callbackActivating callback Accepting a callbackPutting external subscribers on hold Call waiting CWHolding calls Call Hold Accepting/rejecting external call waitingReserving a line Calling line identification restriction ClirAutomatic call forwarding due to inaccessible handset Set MSN for next callSeize specific MSNs During or immediately after the call Tracing switchCancel CallPark after answering a call Parking/continuing calls unparkSend directory or provider list Using several handsetsTransferring telephone directory entries Sending an entry to another handsetAn internal call number Signalled without a ring toneRoom monitor Receive directory or provider listStoring an internal call number for the room monitor Storing an external call number for the room monitor Using walk and talk mode Walk and Talk modeNight service Activating walk and talk mode on the handsetEntering an internal destination call number Entering an automatic start/end time for night serviceActivating/deactivating night service Entering an external destination call numberCharge and call duration display Configuring determination of costsSetting up Costs cent.off Setting up Units cent.offDeleting the cost overview total Displaying a cost overviewDisplay last call costs Entering the price per unitSending SMS messages Administering SMS service centresShort messages SMS PrerequisitesEntering, changing or deleting call numbers of SMS centres Activating/deactivating the SMS transmit centreWriting, saving and sending SMS messages Registering/de-registering with the SMS centreProducing an SMS message Saving an SMS message without sending itInfo Input+functions Sending an SMS message without saving it Interrogating available memory spaceReading and deleting received SMS messages Inbox listDial the call number of the SMS message DirectoryDisplay receive MSN who is the SMS message for? SMS message from?Outbox list Options when reading an SMS messageReading and deleting stored SMS messages SMS on PBXs Other SMS featuresErrors while an SMS message is being transmitted Options when reading a stored SMS messageSecurity settings Specifying the class-of-serviceChange system PIN Set up new emergency number Emergency numbersDialling the emergency number Call transfer ECT Explicit Call Transfer Operation using a telephone systemPrefixes access codes Entering a prefix access codeDialling options External enquiry callEnd external enquiry call Activating * and # dialling Setting optionsActivating automatic keypad switching Activating standard dialling IsdnActivate the keypad for the next call only Special requirements5th step 4th stepOperation with Gigaset repeater Activate/deactivate repeater capabilityRegistering a repeater Questions and answers AppendixContact with liquid For PABXs No calls are beingForwarding condi For call forwardingSo bus does not ring Question Possible cause Possible solution Handset does notScope GuaranteeGuarantee period Service Excerpt from the original declaration Nickel-Cadmium NiCd Nickel-Metal Hydride NiMH Power consumptionRecommended batteries Handset operating/charging timesFeature Status General technical dataFunction Gigaset Other Classic Manuf CompatibilityAccessories Gigaset 4000 Micro handsetGigaset 4000 Comfort handset Gigaset 4000 Classic* handset Gigaset repeaterNot available in all countries Menu displays Gigaset 4000 Comfort menuStep Menu of the Gigaset 4110isdn base station Base Settings StatusBase Settings Missed calls Base Settings Call preparatBase Settings Settings Security Base Settings Forward. netwBase Settings Forward. base Base Settings Night serviceBase Settings Settings Setup user Base Settings Settings System settings Base Settings Settings Service centres Base Settings Settings Isdn settingsIsdn Glossary Callback on busy Call deflectionCall forwarding Call waitingConference call Calling Line Identification Restriction ClirChannel Charge displayEnhanced line Digital exchangeElectronic code lock En-bloc diallingKeypad Internal callsInternal ringer Isdn abbreviationsParking calls On-hook diallingOpen listening Outgoing MSN freely selectableReject call waiting Remote power-onRing delay Recording the callsIndex of keywords Receive Send entry Emergency number SMS A3 1 0 0 8 G4 1 1 0 B1 0 2 2 7 6 1