Smooth Fitness 7.1HR Cleaning, Deck Lubrication, To apply lubricant to the walking belt

Page 30

30

SMOOTH 7.1HR POWER FOLDING TREADMILL

MAINTENANCE

CLEANING:

Routine cleaning of your treadmill will extend the product's life.

??Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugged from the wall electrical outlet before attempting any cleaning or maintenance.

??Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight.

??After each workout: Wipe off the console and other treadmill surfaces with a clean, water dampened soft cloth to remove excess perspiration.

??Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.

DECK LUBRICATION:

The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be lubricated usually within the first year or 500 hours of use. Call your local Smooth dealer for service or questions regarding EVO products.

Every 3 months or 30 hours of operation lift the sides of the walking belt and feel the top surface of the walking board as far as you can reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow the instructions below.

Please use Lube 'N Walk (can be purchased from your dealer or call the number on the front of the manual), or a non- petroleum based silicone such as "Napa 8300" (available at most stores).

To apply lubricant to the walking belt:

1.Position the walking belt so that the seam is located on top and in center of the walking board.

2.Insert the spray nozzle into the spray head of the lubricant can.

3.While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board approximately 6" from the front of the treadmill. Apply the silicone spray to the walking board, moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately 4 seconds on each side.

4.Allow the silicone to "set" for 1 minute before using the treadmill.

Spray lubricant from front to back.

Visit us at: www.smoothfitness.com

Image 30
Contents Smooth 7.1HR Power Folding Treadmill USER’S ManualPrecautions For future service or related questionsPrecautions Power Requirements Power RequirementsPreassembly Hardware Comparison Chart Hardware chartMillimeters Parts List Description Qty Order NoNo. Description Qty. Order No Parts Diagram Parts Diagram Parts Diagram Assembly StepAssembly Assembly Assembly Assembly Assembly Folding Instructions Follow These Instructions to Fold UP Your 7.1HR TreadmillTreadmill Unattended Plugged in AT ANY Time Unfolding Instructions Follow These Instructions to Unfold Your 7.1HR TreadmillTransporting your treadmill Level Adjustment Level AdjustersLeveling the treadmill Computer Operation Recovery Heart Rate Control Selecting ModeUser Data SET UP NEW User Data SET UPEnter P1 Quick Start StartP2 Time SET UP SpeedIncline P3 Distance SET UP P4 Calories SET UP P5, P6 and P7 Preset CoursesRecovery P8 Heart Rate Control ProgramBody FAT Using the Chest Belt Heart Rate Monitor Maintenance HOW to Maintain the 7.1HR TreadmillBelt Adjustment Cleaning Deck LubricationTo apply lubricant to the walking belt Warranty Important Steps Before beginningTarget Heart Rate Finding your pulseAerobic exercise Muscle Chart Targeted muscle groupsToe Touch Stretching RoutineWarm up and cool down Shoulder LiftSide Stretch Hamstring StretchInner Thigh Stretch Calf-Achilles StretchTreadmill will not fold up TroubleshootingComputer LCD lights up but the running belt has no movement Computer LCD does not show the pulseTreadmill looses power during use Treadmill walking belt slows during use888.800.1167