Ironman Fitness LEGACY owner manual IMPORTANT, Please Note

Assembly

4.Connect the Console Harness together as shown in Figure 4a. Note: The upright console harness wire should be inserted through grommet in left upright before con- necting to harness from console assembly.

5.Connect the Coax cable from the Right Upright to Coax cable from the Console as shown in Figure 4b. Note: Make sure to hand tighten coax connector only. Do Not overtighten.

6.Connect the Console to the Left and Right Uprights by sliding the Console con- necting brackets into the end of the Left and Right Uprights as shown in Figure

4.Tighten into place using 5/16”-18x45 Shoulder Allen Bolt (Qty. 2), Spring Washer

8mm (Qty. 2), and Washer 9*16*1.6 mm (Qty. 2).

IMPORTANT, PLEASE NOTE:

While connecting the Console to the Left and Right Uprights pay attention not to pinch the wire harness.

	CONSOLE
	EKG HARNESS
	COAX CABLE
	SPRING WASHER 8 mm
	SMALL WASHER 9*16*1.6 mm
CONSOLE	SHOULDER ALLEN
HARNESS	BOLT 5/16”-18x45

Figure 4: Console Installation

LEFT UPRIGHT

CONSOLE HARNESS

GROMMET

Figure 4a: Console Installation

IMPORTANT, PLEASE NOTE:

While connecting the Console to the Left and Right Uprights pay attention not to pinch the wire harness. Do not overtighten connector.

Figure 4b: Coax Connection