Assembly
7.Position the Left and Right Bottom Handle Covers to underside of handle assembly, then connect the EKG Harness Wires to the Left and Right Bottom Handle Pulse Plates as shown in Figure 5. Tighten into place using Philip Screw ST4.2X16 (Qty. 2) and Philip Flathead Screw 4.2*16 (Qty 4).
Next, install the End Caps to the handle assembly.
IMPORTANT, PLEASE NOTE:
Tighten all hardware installed in Step 1 through Step 7.
CONSOLE |
END CAP |
PHILIP SCREW |
ST4.2x16 |
RIGHT BOTTOM |
HANDLE COVER |
PHILIP FLATHEAD |
SCREW ST4.2x16 |
LEFT BOTTOM |
HANDLE COVER |
Figure 5: Left and Right Bottom Handle Cover Installation
8.Fold the treadmill into the storage posi- tion and lock into place as shown in Figure