TV Operation: Connections
Connecting a DVD Player:
Locate RCA jacks on the back of the con- sole of the Legacy. Connect composite cable from console to dvd player. Connect yellow to yellow, red to red, and white to white. Turn TV on and press the input button. Turn the DVD player on. You are now ready to watch a dvd.
Connecting a Cable/Satellite Signal
With Receiver:
Locate coax input on the bottom of the right upright of treadmill. Connect coax cable
to receiver output. Turn TV on and change channel to 3 or 4, depending on model of receiver. Use receiver to change to desired Channel.
Cable Without Receiver:
Locate coax input on the bottom of the right upright of treadmill. Connect coax cable to outlet. Turn TV on. Press Menu and use chan- nel button to go to tuning. Press VOLUME
-until TUNE is highlighted. Press Channel- to select. Press VOLUME - to highlight AUTO, press Channel - to select. The TV will now locate all available channels.
UHF/VHF Antenna:
Locate coax input on the bottom of the right upright of treadmill. Connect UHF/VHF an- tenna. Turn TV on. Press Menu and use chan- nel button to go to tuning. Press VOLUME
-until TUNE is highlighted. Press Channel- to select. Press VOLUME - to highlight AUTO, press Channel - to select. The TV will now locate all available channels.
23