Healthrider HRTL71830 Assembly, Ing. The connectors should slide together easily, 6969 133133

Page 6

ASSEMBLY

Assembly requires two persons.Place the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until the treadmill is assembled.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires your own phillips screwdriver

, and the included allen wrench

.

1.With the help of a second person, carefully raise the Uprights (65) to a vertical position.

Have the second person hold the console assembly near the Uprights (65) as shown. Look under the console as- sembly and locate the Console Wire Harness (71).

Cut the plastic ties securing the Upright Wire Harness

(85) to the right Upright (65). Connect the Upright Wire

Harness to the Console Wire Harness (71).Make sure to connect the connectors properly (see the inset draw-

ing). The connectors should slide together easily and

snap into place. If the connectors do not slide together easily and snap into place, turn one connector and try

again. IF THE CONNECTORS ARE NOT CONNECTED

PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

2.Insert the excess Wire Harnesses (71, 85) into the right Upright (65).

Set the console assembly on the Uprights (65). While a second person holds the console assembly, attach the console assembly with four Console Bolts (133) and four Console Washers (69) as shown. Firmly tighten the Console Bolts.

1

 

Console

 

Assembly

 

 

71

 

85

71

65

 

85

 

2

 

Console

 

Assembly

 

71, 85

6969

133133

65

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Customer HOT Line QUESTIONS?Model No. HRTL71830 Serial No Mon.-Fri., 6 a.m.- 6 p.m. MSTTable of Contents Wear appropriate exercise clothes when Important PrecautionsUse the treadmill only as described in this manual Move the Treadmill onTo the next settings of the CD or video program Never drop or insert any object into any open- ingBefore YOU Begin Right Side BackAgain. if the Connectors are not Connected AssemblyIng. The connectors should slide together easily 6969 133133Make sure that the power cord is unplugged Make sure that no wires are pinched.ReattachAs shown. Do not tighten the Screws yet Performant Lube HOW to Plug in the Power CordTreadmill Operation Use only a single-outlet surge suppressor that isProgram Features of the ConsoleFree See pages 16 ProgramHOW to USE the Manual Mode Calories/Pulse See page 23 and turn off the demo modeDistance/Incline dis Measure your heart rate if desiredSelect one of the personal trainer programs HOW to USE Personal Trainer ProgramsInsert the key into the console Button to start the programSee on Demo mode4Follow your progress with the displays Turn on the fan if desiredEnter a maximum speed Select a heart rate program4Enter your age If the 85% Max program is selected, go to stepEach heart rate program is divided into several time BeginningWith the optional chest pulse sensor HOW to Create Custom Programs 4When the program is finished, remove the keySelect one of the custom programs HOW to USE Custom Programs For the current segmentHOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes Plug the adapter into the Line OUT jack on your stereo HOW to Connect Your Home StereoHOW to Connect Your Computer Phones jack, see instruction BHOW to Connect Your VCR ProgramsWhen the CD or video program is completed, Next settings of the CD or video programChange to the next settings of the CD or video program Follow your progress with the LED track DisplaysFollow the steps below to use a program from our Web site HOW to USE Programs Directly from OUR WEB SiteWhen you are finished exercising, remove Follow the on-line instructions to start ProgramInformation MODE/DEMO Mode HOW to Adjust the Cushioning SystemOptional Chest Pulse Sensor Left handgrip HOW to Fold the Treadmill for StorageHOW to Move the Treadmill Carefully move the treadmill to the desired locationHOW to Lower the Treadmill for USE Hold the treadmill firmly with both hands, and lowerTroubleshooting ProblemsolutionUnplug Power Cord Cord Plug the Power CordIf the walking belt is off-center, first re Move the key Be careful not to overtighten the walkingWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Qty 111 Pulley Spacer 139 White Wire, 2 FDescription 122 Idler Arm Nylon WasherR0903A Exploded DRAWING-Model No. HRTL71830 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty Part No R0903A

HRTL71830 specifications

The Healthrider HRTL71830 is a multifunctional treadmill designed for both beginners and seasoned fitness enthusiasts. With a strong emphasis on providing a supportive and engaging workout experience, this model incorporates advanced features and technologies aimed at optimizing performance and comfort.

One of the standout features of the Healthrider HRTL71830 is its powerful motor, which delivers consistent performance during intense workouts. Boasting a peak horsepower of 2.5, it allows users to run, jog, or walk at varying speeds to suit their fitness levels. The motor is complemented by a spacious running surface, measuring 20 inches wide and 55 inches long. This generous size ensures ample room for comfortable movement, accommodating users of all sizes.

The HRTL71830 also comes equipped with adjustable incline settings. The incline technology allows users to simulate uphill training, which can significantly enhance calorie burning and improve cardiovascular health. With a quick one-touch incline adjustment feature, users can switch between different incline levels effortlessly, making their workouts more versatile.

Another prominent characteristic of this treadmill is its advanced cushioning system. The proprietary FlexSelect cushioning technology provides users with the option to customize their running surface. This feature reduces the impact on joints, offering a softer feel during runs, while also allowing for a firmer surface when desired, mimicking outdoor conditions.

To enhance the user experience, the Healthrider HRTL71830 features a built-in console with a large display. The console displays essential workout metrics including time, speed, distance, calories burned, and heart rate, allowing users to track their progress effectively. Additionally, the treadmill offers multiple built-in workout programs that cater to various fitness goals, from weight loss to endurance training.

Incorporating connectivity features, the HRTL71830 includes Bluetooth technology, enabling users to connect their devices seamlessly for music playback or interaction with fitness apps. This modern touch makes workouts more enjoyable and motivates users to stay engaged throughout their exercise routines.

In summary, the Healthrider HRTL71830 is a robust treadmill that combines power, versatility, and advanced technology to meet the diverse needs of users. With features such as a powerful motor, adjustable incline, FlexSelect cushioning, an intuitive console, and connectivity options, it stands as a strong contender for anyone looking to enhance their home workout regimen.
Top Page Image Contents