NordicTrack 831.159770 user manual Open the parts bag labeled Weight Inserts

3.Place two Weight Bumpers (19) over the indicat- ed holes in the Stabilizer (5). Insert the two Weight Guides (23) into the Weight Bumpers and the Stabilizer.

Attach the indicated Weight Guide (23) to the Stabilizer (5) with a 3/8” x 2 1/2” Bolt (54), two 5/8” x 1/2” Bushings (42), two 3/8” Washers (55), and a 3/8” Nylon Jamnut (63).

4.Open the parts bag labeled “Weight Inserts.”

See the inset drawing. Press two Weight Inserts

(77)into the indicated holes in each Weight (26).

Make sure the large pin groove is oriented as shown.

Slide all nineteen Weights (26) onto the Weight Guides (23). Make sure the Weights are orient- ed correctly; the pin grooves must be on the side shown.

Press the Weight Tube Bumper (47) into the bot- tom of the Weight Tube (36).

Slide the Top Weight (16) onto the Weight Guides (23). Insert the Weight Tube (36) into the Weights

(26).

3
23
55
63
42
19
5
	55
42	54
4
23
16
36
47
	77
26	26
Pin
Grooves	Large Pin
	Groove

7